The Clutch In The Compressor May Fail If The Refrigerant Charge Exceeds Specifications Caterpillar


The Clutch In The Compressor May Fail If The Refrigerant Charge Exceeds Specifications

Usage:

The Clutch In The Compressor May Fail If The Refrigerant Charge Exceeds Specifications

CONFIDENTIAL TIBU3897-00

TECHNICAL INFORMATION BULLETIN

JULY 16, 2003

EXCAVATORS

312C (BNN, FDS), 312C L (CBA, CBT), 315C (AKE, CFB), 315C L (ANF, CFT, CJC), 318C (AWS, BTG, DAH, FAA, GPA, MDY), 320C (AMC, BCN, BEF, DBG, EGA, FBC, JPL, MAB, RAW), 320C L (ANB, BBC, BDE, GAC, GLA, PAB), 32OC S (BBL, EGL), 320C U (CLM, MAC), 320C LN (BEA, JTG), 320C LU (CLZ, PAC), 320C FMHW (BGB),

320C FMST (BKK), 322C (BLP, BNY, BRN, DAA), 322C L (BFX, BGR, BKM, BMX, FED, MAR), 322C LN (BFK, EMR), 325C (AMH, BKH, BKW, BLA, DTF, JLD), 325C L (BLX, BMM, BTD, CRB, JLC), 325C LN (CSJ), 330C (BTM, GAG, JAB, JCD, MCA), 330C L (CAP, GKX, HAA, JNK, KDD, MKM, RBH),

330C LN (CGZ), EXCAVATORS

 

Component Code(s) 1802, 7320

SUBJECT: THE CLUTCH IN THE COMPRESSOR MAY FAIL IF THE REFRIGERANT
CHARGE EXCEEDS SPECIFICATIONS

PROBLEM:

An over charge of refrigerant in the air conditioning system may cause the clutch in the 176-1895 Compressor Group to malfunction.

SOLUTION:

The correct amount of refrigerant must be charged in the air conditioning system. Refer to Specifications, RENR3763, "312C with High Ambient Cooling Package, 315C, 318C, 320C, 322C, 325C, and 330C Excavators Air Conditioning and Heating" for the correct amount of refrigerant for your machine.

COPYRIGHT 2003 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

Governor Motor Governor Motor
Instructions For Machines Configured With Updated Governor Motors Instructions For Machines Configured With Updated Governor Motors
3-PIECE EXHAUST MANIFOLD ASSEMBLIES ON 3056E ENGINES INSTALLED IN M300C SERIES WHEELED EXCAVATORS 3-PIECE EXHAUST MANIFOLD ASSEMBLIES ON 3056E ENGINES INSTALLED IN M300C SERIES WHEELED EXCAVATORS
Troubleshooting Guide For Boom Or Stick Drop, Implement Drift, Or A Powered Movement Of Any Implement On Certan Excavators Troubleshooting Guide For Boom Or Stick Drop, Implement Drift, Or A Powered Movement Of Any Implement On Certan Excavators
HESITATION TO THE LEFT DURING SWING INITIATION HESITATION TO THE LEFT DURING SWING INITIATION
Shock Hazard for the VR-6 and K65-12B Voltage Regulators Shock Hazard for the VR-6 and K65-12B Voltage Regulators
A Shuttle Valve In The Main Hydraulic Control Valve May Cause Error Code 1192-07 And Hydraulic Function Shutdown A Shuttle Valve In The Main Hydraulic Control Valve May Cause Error Code 1192-07 And Hydraulic Function Shutdown
Governor Motor Governor Motor
EXPANSION/SPLITTING OF THE STICK AS A RESULT OF WATER ENTERING THE STICK AND FREEZING DURING EXTREME COLD WEATHER CONDITIONS EXPANSION/SPLITTING OF THE STICK AS A RESULT OF WATER ENTERING THE STICK AND FREEZING DURING EXTREME COLD WEATHER CONDITIONS
MODIFICATIONS ARE NECESSARY IN ORDER TO USE THE 165-9889 BROOM BRACKET GP ON ALPHA XR MACHINES MODIFICATIONS ARE NECESSARY IN ORDER TO USE THE 165-9889 BROOM BRACKET GP ON ALPHA XR MACHINES
MAIN CONTROL VALVE PLUGS LEAKS ON M300C-SERIES WHEELED EXCAVATORS MAIN CONTROL VALVE PLUGS LEAKS ON M300C-SERIES WHEELED EXCAVATORS
Procedure For The Preload Of The Bearings In The Final Drive Procedure For The Preload Of The Bearings In The Final Drive
AIR CLEANER FOR THE 302.5 MHE MACHINE AIR CLEANER FOR THE 302.5 MHE MACHINE
POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS
IGNITION SWITCH FOR THE MHE CR MACHINES IGNITION SWITCH FOR THE MHE CR MACHINES
INCORRECT WHEEL SAW BIT HOLDER RELEASED AS SERVICE REPAIR PART INCORRECT WHEEL SAW BIT HOLDER RELEASED AS SERVICE REPAIR PART
STANDARD NUT WILL NOT HOLD THE RECOMMENDED TORQUE FOR TRENCHER TEETH STANDARD NUT WILL NOT HOLD THE RECOMMENDED TORQUE FOR TRENCHER TEETH
Bucket Cylinder Lines Routing on 303CR and 304CR Bucket Cylinder Lines Routing on 303CR and 304CR
Adapter Welds And Base Edge Cracking Adapter Welds And Base Edge Cracking
2 SECOND DELAY IN ACTIVATION OF MULTI-COMBINATION VALVE 2 SECOND DELAY IN ACTIVATION OF MULTI-COMBINATION VALVE
REPLACEMENT OF B SERIES A/C CONTROL PANEL REPLACEMENT OF B SERIES A/C CONTROL PANEL
THE PRESSURE PORT FOR THE TRACK TENSION CYLINDER MAY BE MACHINED INCORRECTLY THE PRESSURE PORT FOR THE TRACK TENSION CYLINDER MAY BE MACHINED INCORRECTLY
Work Tools Coupler Fit Up Issues Work Tools Coupler Fit Up Issues
The Temperature Sensor In The Evaporator Core For The Air Conditioner Must Be Located In The Correct Position The Temperature Sensor In The Evaporator Core For The Air Conditioner Must Be Located In The Correct Position
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.