INCORRECT WHEEL SAW BIT HOLDER RELEASED AS SERVICE REPAIR PART Caterpillar

INCORRECT WHEEL SAW BIT HOLDER RELEASED AS SERVICE REPAIR PART

Usage:

INCORRECT WHEEL SAW BIT HOLDER RELEASED AS SERVICE REPAIR PART

CONFIDENTIAL TIBU3914-00

Show/hide table

TECHNICAL INFORMATION BULLETIN	JULY 23, 2003
WORK TOOL SKID STEER LOADER MULTI TERRAIN LOADER	SW54 (WWS1-UP), SW60 (WLS1-UP) WHEEL SAW 228 (6BZ1-UP), 248 (6LZ1-UP) SKID STEER LOADERS
	Component Code(s): 6712, 0751, 7000

SUBJECT: INCORRECT WHEEL SAW BIT HOLDER RELEASED AS SERVICE REPAIR PART

PROBLEM:

The 226-9308 Bit Holder was released as the service repair part for the SW45 and SW60 Wheel Saws. This is incorrect. The 226-9308 Bit Holder should not be used on SW45 and SW60 Wheel Saws.

SOLUTION:

A new service replacement part is now pending release. The new 242-6968 Bit Holder is expected to be available in the parts system by mid-September.

In the meantime, contact one of the following individuals if you have problems and require new bit holders for your SW45 and SW60 Wheel Saws:

Show/hide table

Kent Pellegrini NACD Ind & Work Tool	S. Henry Long CWTS-BCP Product Support
Telephone: 309 675-6158	Telephone: +44(0)1455 825712
Email: pellegrini_kent_r@cat.com	Email: long_s_henry@cat.com

COPYRIGHT 2003 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

IGNITION SWITCH FOR THE MHE CR MACHINES IGNITION SWITCH FOR THE MHE CR MACHINES

POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS

AIR CLEANER FOR THE 302.5 MHE MACHINE AIR CLEANER FOR THE 302.5 MHE MACHINE

The Clutch In The Compressor May Fail If The Refrigerant Charge Exceeds Specifications The Clutch In The Compressor May Fail If The Refrigerant Charge Exceeds Specifications

Governor Motor Governor Motor

Instructions For Machines Configured With Updated Governor Motors Instructions For Machines Configured With Updated Governor Motors

3-PIECE EXHAUST MANIFOLD ASSEMBLIES ON 3056E ENGINES INSTALLED IN M300C SERIES WHEELED EXCAVATORS 3-PIECE EXHAUST MANIFOLD ASSEMBLIES ON 3056E ENGINES INSTALLED IN M300C SERIES WHEELED EXCAVATORS

Troubleshooting Guide For Boom Or Stick Drop, Implement Drift, Or A Powered Movement Of Any Implement On Certan Excavators Troubleshooting Guide For Boom Or Stick Drop, Implement Drift, Or A Powered Movement Of Any Implement On Certan Excavators

HESITATION TO THE LEFT DURING SWING INITIATION HESITATION TO THE LEFT DURING SWING INITIATION

Shock Hazard for the VR-6 and K65-12B Voltage Regulators Shock Hazard for the VR-6 and K65-12B Voltage Regulators

A Shuttle Valve In The Main Hydraulic Control Valve May Cause Error Code 1192-07 And Hydraulic Function Shutdown A Shuttle Valve In The Main Hydraulic Control Valve May Cause Error Code 1192-07 And Hydraulic Function Shutdown

Governor Motor Governor Motor

STANDARD NUT WILL NOT HOLD THE RECOMMENDED TORQUE FOR TRENCHER TEETH STANDARD NUT WILL NOT HOLD THE RECOMMENDED TORQUE FOR TRENCHER TEETH

Bucket Cylinder Lines Routing on 303CR and 304CR Bucket Cylinder Lines Routing on 303CR and 304CR

Adapter Welds And Base Edge Cracking Adapter Welds And Base Edge Cracking

2 SECOND DELAY IN ACTIVATION OF MULTI-COMBINATION VALVE 2 SECOND DELAY IN ACTIVATION OF MULTI-COMBINATION VALVE

REPLACEMENT OF B SERIES A/C CONTROL PANEL REPLACEMENT OF B SERIES A/C CONTROL PANEL

THE PRESSURE PORT FOR THE TRACK TENSION CYLINDER MAY BE MACHINED INCORRECTLY THE PRESSURE PORT FOR THE TRACK TENSION CYLINDER MAY BE MACHINED INCORRECTLY

Work Tools Coupler Fit Up Issues Work Tools Coupler Fit Up Issues

The Temperature Sensor In The Evaporator Core For The Air Conditioner Must Be Located In The Correct Position The Temperature Sensor In The Evaporator Core For The Air Conditioner Must Be Located In The Correct Position

SWIVEL TAPPET BOLTS LOOSENING SWIVEL TAPPET BOLTS LOOSENING

Do Not Replace Speed Sensors Because of Visible Oil Leaks Do Not Replace Speed Sensors Because of Visible Oil Leaks

Information that is required to understanding and the determining of the root cause of a piston pin joint failure Information that is required to understanding and the determining of the root cause of a piston pin joint failure

Replace Failed 3054E and 3056E Fuel Injection Pumps with New Pumps from Cat Parts Replace Failed 3054E and 3056E Fuel Injection Pumps with New Pumps from Cat Parts