Aftercooler - Install
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
图 1 | g00590430 |
Show/hide table
图 2 | g00590431 |
- 将四个 O 形密封圈 (4) 安装在后冷器芯管上。 将皂液涂抹在 O 形密封圈上。
- 将两个 3/8 英寸 的导螺栓安装在后冷器的螺栓顶行的两端。
- 用防松螺母将 1/2 英寸 的锻造吊环 (1) 安装在后冷器 (2) 的顶部。 将适当的起吊设备固定到吊环螺栓上。 小心地将后冷器安置于导螺栓上。 将固定后冷器的螺栓安装在缸体。
- 将新的 O 形密封圈安装在两个适配器 (5) 上。 将皂液涂抹在 O 形密封圈上。 将两个适配器 (5) 和两个适配器 (6) 安装在后冷器上。
Show/hide table
图 3 | g00590434 |
- 将新环 (8) 和 O 形密封圈 (9) 安装在后冷器水管上。 将皂液涂抹在 O 形密封圈上。 将适配器 (7) 安装在管上。
Show/hide table
图 4 | g00590436 |
- 确保 O 形密封圈在适配器的合适位置。 安装后冷器出水管 (10) 。 安装后冷器进水管 (11) 。 将通风管连接至后冷器出水管 (10) 上。
Show/hide table
图 5 | g00590446 |
G3606 发动机 |
Show/hide table
图 6 | g00590444 |
G3608 发动机 |
- 用螺栓 (14) 将执行器和阻风门安装至后冷器上。 如果连杆组件与执行器分离或与阻风门板分离,请参阅技术规格手册, SENR4257, "空气管路(阻风门)"中有关标定的说明。
Show/hide table
图 7 | g00590437 |
典型实例 |
- 将连接器连接至接头 (12) 上。
- 将点火线放好。 用四个螺栓 (13) 安装两个夹子。
- 将皂液涂抹在法兰 O 形密封圈和管道 (16) 上。
Show/hide table
图 8 | g00590440 |
G3606 发动机 |
Show/hide table
图 9 | g00590439 |
G3608 发动机 |
- 用螺栓 (15) 安装法兰和管道。
- 使用新垫片。 使用螺栓安装弯头 (17) 。
- 使用冷却液将后冷器/机油冷却器回路加注至正确油位。 更多信息,请参阅操作和维护手册。
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
G3606 and G3608 Engines Aftercooler - Remove
3406E and 3456 Generator Set Engines Electrical Ground Stud
G3500 Engines Engine Oil Pan - Disassemble
G3500B Engines Fuel Metering Valve Screen - Check
G3606 and G3608 Engines Air Inlet Elbow - Remove and Install
G3500 Engines Engine Oil Pan - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fan Drive - Assemble
G3500 Engines Engine Oil Pan - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
3406E and 3456 Generator Set Engines Flywheel Housing
120H and 135H Motor Graders Hydraulic and Steering System Gerotor Motor (Circle Drive)
G3500 Engines Engine Oil Pan - Assemble
G3500 Engines Engine Air Cleaner Service Indicator - Inspect
3406E and 3456 Generator Set Engines Exhaust Manifold
G3500 Engines Engine Oil and Water Pump Drive - Assemble
G3606 and G3608 Engines Air Inlet Choke - Remove
G3606 and G3608 Engines Air Inlet Choke - Disassemble
G3606 and G3608 Engines Air Inlet Choke - Assemble
G3500 Engines Engine Oil and Water Pump Drive - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Remove
3406E Generator Set Engines Refill Capacities
3406E and 3456 Generator Set Engines Electric Starting Motor
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Install