Electrical Ground Stud
Show/hide table
 | |
| Illustration 1 | g00590230 |
Typical example | |
(1) Nut
- Tighten the outer nut on the ground stud to the following torque. ... 10 ± 3 N·m (89 ± 27 lb in)
Caterpillar Information System:
G3500 Engines Engine Oil Pan - Disassemble
G3500B Engines Fuel Metering Valve Screen - Check
G3606 and G3608 Engines Air Inlet Elbow - Remove and Install
G3500 Engines Engine Oil Pan - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fan Drive - Assemble
G3500 Engines Engine Oil Pan - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
3406E and 3456 Generator Set Engines Flywheel Housing
120H and 135H Motor Graders Hydraulic and Steering System Gerotor Motor (Circle Drive)
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Sequence Valves - Remove and Install
G3606 and G3608 Engines Generator - Remove and Install
G3606 and G3608 Engines Air Valve - Remove and Install
G3606 and G3608 Engines Aftercooler - Remove
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
G3606 and G3608 Engines Aftercooler - Install
G3500 Engines Engine Oil Pan - Assemble
G3500 Engines Engine Air Cleaner Service Indicator - Inspect
3406E and 3456 Generator Set Engines Exhaust Manifold
G3500 Engines Engine Oil and Water Pump Drive - Assemble
G3606 and G3608 Engines Air Inlet Choke - Remove
G3606 and G3608 Engines Air Inlet Choke - Disassemble
G3606 and G3608 Engines Air Inlet Choke - Assemble
G3500 Engines Engine Oil and Water Pump Drive - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines Turbocharger - Remove