3116 Truck Engine Caterpillar


Fuel Tank Water and Sediment - Drain

Usage:

3116 2BK
Drain the water and the sediment from the bottom of the fuel tank after each oil change. Drain the fuel tanks more often in high humidity conditions.

Drain the water and the sediment from the fuel storage tank during the following conditions:

  • Oil change

  • Refill of the tank

This will help to prevent water and/or sediment from being pumped from the storage tank into the engine fuel tank.

Caterpillar Information System:

G3500 Engines Flywheel - Remove and Install
3406E and 3456 Generator Set Engines Engine Oil Pan
3116 Truck Engine Fuel Inlet Screen - Clean/Inspect/Replace
G3606 and G3608 Engines Air Silencer - Remove and Install
3116 Truck Engine Fuel Injection Timing - Check
G3500B Engines Overhaul (Top End)
G3500B Engines Overhaul (Major)
G3500 Engines Flywheel Housing - Install
Electronic Modular Control Panel II+ (EMCP II+) Parallel Setpoint Viewing OP2-3
G3500 Engines Overhaul (In-Frame)
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Relief Valve (Travel Motor) - Test and Adjust
G3606 and G3608 Engines Fuel Shutoff Solenoid - Remove and Install
3608 Engine Air Lubricator - Remove and Install
3116 Truck Engine Walk-Around Inspection
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fan Drive - Disassemble
G3500 Engines Vibration Damper - Remove and Install
G3606 and G3608 Engines Air Valve - Remove and Install
G3606 and G3608 Engines Generator - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Sequence Valves - Remove and Install
120H and 135H Motor Graders Hydraulic and Steering System Gerotor Motor (Circle Drive)
3406E and 3456 Generator Set Engines Flywheel Housing
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
G3500 Engines Engine Oil Pan - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.