Vibration Damper - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 2 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove eight bolts (1) and guard (2).
Show/hide table
Illustration 2 g00589939 - Remove two bolts (5).
- Install two 1"-14 NF x 11" (280 mm) guide bolts (3).
- Install Tool (A) and attach a suitable lifting device.
- Remove the remaining bolts (5).
- Remove vibration damper (4). The damper weighs approximately
91 kg (200 lb) . - Remove bolts (6) and remove the adapter from vibration damper (2), if necessary. The adapter weighs approximately
34 kg (75 lb) .
Show/hide table
Illustration 1 | g00589930 |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 2 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- If the adapter was removed, install the adapter with bolts (6). Tighten the bolts to a torque
100 ± 15 N·m (75 ± 10 lb ft) .Show/hide tableIllustration 3 g00589939 - Install Tool (A) and attach a suitable lifting device.
- Apply 4C-5593 Anti-Seize Compound to the threads of the bolts.
- Position vibration damper (4) on the engine and install four bolts (5).
- Remove the two guide bolts (3).
- Install two remaining bolts (5). Tighten the bolts to a torque of
1125 ± 100 N·m (830 ± 75 lb ft) .Note: Refer to the Specifications Module, "Vibration Damper" for more information.
Show/hide tableIllustration 4 g00589930 - Install guard (2) and eight bolts (1). Tighten the bolts to a torque of
15 ± 3 N·m (11 ± 2 lb ft) .
Caterpillar Information System:
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fan Drive - Disassemble
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
3116 Truck Engine Walk-Around Inspection
3608 Engine Air Lubricator - Remove and Install
3116 Truck Engine Fuel Tank Water and Sediment - Drain
G3500 Engines Flywheel - Remove and Install
3406E and 3456 Generator Set Engines Engine Oil Pan
3116 Truck Engine Fuel Inlet Screen - Clean/Inspect/Replace
G3606 and G3608 Engines Air Silencer - Remove and Install
3116 Truck Engine Fuel Injection Timing - Check
G3500B Engines Overhaul (Top End)
G3500B Engines Overhaul (Major)
G3606 and G3608 Engines Air Valve - Remove and Install
G3606 and G3608 Engines Generator - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Engine Oil Sequence Valves - Remove and Install
120H and 135H Motor Graders Hydraulic and Steering System Gerotor Motor (Circle Drive)
3406E and 3456 Generator Set Engines Flywheel Housing
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure Switch - Remove and Install
G3500 Engines Engine Oil Pan - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Fan Drive - Assemble
G3500 Engines Engine Oil Pan - Install
G3606 and G3608 Engines Air Inlet Elbow - Remove and Install
G3500B Engines Fuel Metering Valve Screen - Check
G3500 Engines Engine Oil Pan - Disassemble