Jacket Water Heater - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Drain the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities".
Show/hide table
Illustration 1 g01097932 - Disconnect tube assembly (3).
- Remove bolts (2) and jacket water heater (1).
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position jacket water heater (1) on the engine.
- Install bolts (2).
- Connect tube assembly (3).
- Refill the coolant system. Refer to Operation and Maintenance Manual, "Refill Capacities".
Show/hide table
Illustration 2 | g01097932 |
Caterpillar Information System:
3406E On-Highway Engine Camshaft Gear - Remove and Install
365B Excavator Hydraulic System Oil (If Equipped with Fine Filtration Filter) - Change
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Filter (Primary)
Wiring Harness Recommendations For 3500B Locomotive Engines{1408} Wiring Harness Recommendations For 3500B Locomotive Engines{1408}
3412E, C30 and C32 Marine Engines Fuel Filter and Water Separator - Remove and Install
3054 and 3056 Industrial and Generator Set Engines Air Inlet and Exhaust System
G3500 Engines Turbocharger - Remove
3034 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Install
3176B Marine Engine Sensors and Electrical Components
3176B Industrial Engine Refill Capacities
3412E, C30 and C32 Marine Engines Engine Control Module - Remove and Install
G3500 Engines Aftercooler - Remove and Install
3612 and 3616 Engines Engine Oil Pump
3612 and 3616 Engines Engine Oil Pump
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Unit Injector
3612 and 3616 Engines Engine Oil Pump
3034 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove
3034 Engine for Caterpillar Built Machines Fuel Transfer Pump - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Unit Injector Mechanism
3034 Engine for Caterpillar Built Machines Inlet Manifold - Remove
3408E and 3412E Engines for Caterpillar Built Machines Piston Cooling Jets - Remove and Install
Installation And Mounting System For Locomotive Engine/Generator Packages{1021} Installation And Mounting System For Locomotive Engine/Generator Packages{1021}
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Front Idler