Fuel Filter and Water Separator - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench As | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove water separator (1) from the water separator base.
Show/hide table
Illustration 2 g00579819 - Disconnect fuel hose assembly (4). Plug and cap all openings.
- Remove bolts (2) that fasten water separator base (3) to the fuel block.
Show/hide table
| |
| Illustration 1 | g00579816 |
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 185-3630 | Strap Wrench As | 1 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position water separator base (3) on the fuel block and install bolts (2).
- Connect fuel hose assembly (4).
Show/hide table
Illustration 4 g00579816 - Install new water separator (1) with Tooling (A).
Show/hide table
| |
| Illustration 3 | g00579819 |
Caterpillar Information System:
3054 and 3056 Industrial and Generator Set Engines Air Inlet and Exhaust System
G3500 Engines Turbocharger - Remove
3034 Engine for Caterpillar Built Machines Fuel Injection Lines - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Install
3176B Marine Engine Sensors and Electrical Components
3176B Industrial Engine Refill Capacities
3412E, C30 and C32 Marine Engines Engine Control Module - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Aftercooler - Remove
3126B Marine Engine General Information
3126B Marine Engine Engine Design
3612 and 3616 Engines Exhaust Manifold
3034 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
Wiring Harness Recommendations For 3500B Locomotive Engines{1408} Wiring Harness Recommendations For 3500B Locomotive Engines{1408}
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Filter (Primary)
365B Excavator Hydraulic System Oil (If Equipped with Fine Filtration Filter) - Change
3406E On-Highway Engine Camshaft Gear - Remove and Install
3412E, C30 and C32 Marine Engines Jacket Water Heater - Remove and Install
G3500 Engines Aftercooler - Remove and Install
3612 and 3616 Engines Engine Oil Pump
3612 and 3616 Engines Engine Oil Pump
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Unit Injector
3612 and 3616 Engines Engine Oil Pump
3034 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove
3034 Engine for Caterpillar Built Machines Fuel Transfer Pump - Install