Hydraulic Track Adjusters - Install
Installation Procedure for the Hydraulic Track Adjuster on CIPI Undercarriage Arrangements which are Based on 330 and 330B Track Type Excavators
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-7640     | Stand Group     | 2     |
8S-7611 | Tube Assembly     | 2     | |
8S-7615 | Pin     | 2     |
- Make sure that the hydraulic track adjuster is thoroughly clean. Also, make sure that the front and the rear faces of the vertical bulkhead that is in the undercarriage frame assembly are thoroughly clean.
- Install a suitable sized guide bolt (4) in the upper mounting hole of hydraulic track adjuster (2), as shown. The guide bolt will help support the hydraulic track adjuster during installation.
Show/hide table
Illustration 1 | g00555712 |
- The weight of the hydraulic track adjuster is 30 kg (65 lb). Use two people to put hydraulic track adjuster (2) in position in the undercarriage frame assembly. Install guide bolt (4) in the hydraulic track adjuster through the upper mounting hole in the vertical bulkhead, as shown. Make sure that the fill and relief valves in the hydraulic track adjuster are facing toward the opening in the side of the undercarriage frame assembly.
Show/hide table
Illustration 2 | g00555713 |
- Install lower mounting bolt (1) that holds the adjuster in place. Remove the guide bolt, and install the upper mounting bolt.
Show/hide table
Illustration 3 | g00535231 |
- Use a pry bar in order to move the front idler and the recoil spring against the hydraulic track adjuster.
- Lift the machine off Tooling (A) and remove the stands. Lower the machine to the floor.
Show/hide table
Illustration 4 | g00555680 |
End By: Connect the track assembly. Refer to Disassembly and Assembly, "Track - Connect" in this manual.
Caterpillar Information System:
3408E and 3412E Engines for Caterpillar Built Machines Fuel Quality - Test
3612 and 3616 Engines Fuel Injection Control Linkage
3500B High Displacement Generator Set Engines Overhaul (Major)
3500B High Displacement Generator Set Engines Overhaul (Top End)
3176B Marine Engine Engine Description
3054 and 3056 Industrial and Generator Set Engines Radiator - Remove and Install
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Hydraulic Track Adjusters - Remove
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Front Idler - Assemble
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Front Idler - Disassemble
3500B and 3500 Marine Propulsion Engines with EUI Option Fuel System Primary Filter/Water Separator - Clean/Replace
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Front Idler and Recoil Spring - Install
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Front Idler and Recoil Spring - Remove
3408E and 3412E Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Hydraulic Track Adjusters - Disassemble
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Hydraulic Track Adjusters - Assemble
SR4 HV and SR4B HV Generators Generator Isolating for Maintenance
3500B Marine Propulsion Engines Model View Illustrations
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Swing Gear and Bearing - Remove
3176B Industrial Engine Overspeed
3500B Marine Propulsion Engines Safety Messages
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Remove
3412E, C30 and C32 Marine Engines Engine Support (Front) - Remove and Install
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Swing Gear and Bearing - Install
3524B Engines for Off-Highway Trucks Self-Diagnostics