3408E and 3412E Engines for Caterpillar Built Machines Caterpillar


Engine Oil Pump - Assemble

Usage:

769C 01X

组装步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
1P-0510  冲头总成 


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g00573618

  1. 利用工具 (A) 将两个轴承 (1) 安装到机油泵壳体内。 轴承接头位置 (2) 必须在中心线 30 ± 15° 的范围内。 所安装的轴承必须与机油泵壳体齐平。

  2. 将定位销安装到机油泵体中。 安装定位销,使定位销延伸到机油泵壳体表面上方 6.40 mm (0.252 inch)


    图 2g00573673

  3. 将干净的机油涂抹在机油泵体轴承的内表面上。 将清洁的发动机机油置于轴 (3) 和轴 (4) 上。

  4. 将轴 (3) 和 (4) 安装到机油泵壳体内。


    图 3g00573690

  5. 如果端盖配有轴承,利用工具 (A) 将两个轴承 (5) 安装到端盖 (7) 内。 轴承接头位置 (6) 必须在中心线 30 ± 15° 的范围内。 所安装的轴承必须与端盖齐平。 在每个轴承内表面上涂抹干净的机油。


    图 4g00573718

  6. 将端盖 (7) 安装到机油泵壳体上。

  7. 将柱塞 (8) 和弹簧 (9) 安装到机油泵壳体内。 安装护圈 (10)。


    图 5g00573720

  8. 将键 (11) 安装到轴 (4) 中。


    图 6g00573725

  9. 将齿轮 (13) 安装到机油泵轴上。 安装螺栓 (12) 并拧紧螺栓至扭矩为 55 ± 10 N·m (41 ± 7 lb ft)

  10. 在组装后发动机机油泵必须能转动自如。

结束:

  1. 安装发动机机油泵。 请参阅拆解和组装, "发动机机油泵 - 安装"。

Caterpillar Information System:

CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Hydraulic Track Adjusters - Install
3408E and 3412E Engines for Caterpillar Built Machines Fuel Quality - Test
3612 and 3616 Engines Fuel Injection Control Linkage
3500B High Displacement Generator Set Engines Overhaul (Major)
3500B High Displacement Generator Set Engines Overhaul (Top End)
3176B Marine Engine Engine Description
3054 and 3056 Industrial and Generator Set Engines Radiator - Remove and Install
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Hydraulic Track Adjusters - Remove
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Front Idler - Assemble
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Front Idler - Disassemble
3500B and 3500 Marine Propulsion Engines with EUI Option Fuel System Primary Filter/Water Separator - Clean/Replace
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Front Idler and Recoil Spring - Install
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Hydraulic Track Adjusters - Disassemble
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Hydraulic Track Adjusters - Assemble
SR4 HV and SR4B HV Generators Generator Isolating for Maintenance
3500B Marine Propulsion Engines Model View Illustrations
CIPI UNDERCARRIAGE Arrangements: 9Q5221, 9Q5234, 9Q5243, 9Q5245, 9Q5246, 9Q5247, 9Q5385, 9Q5433, 9Q5482, 9Q5622, 9Q5661, 9Q5719, 9Q5720, 9Q5721, 9Q5722, 9Q5830, 9Q5840, 9Q5857, 9Q5874, 9Q5883, 9Q5930 and 9Q5940 Swing Gear and Bearing - Remove
3176B Industrial Engine Overspeed
3500B Marine Propulsion Engines Safety Messages
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Remove
3412E, C30 and C32 Marine Engines Engine Support (Front) - Remove and Install
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Swing Gear and Bearing - Install
3524B Engines for Off-Highway Trucks Self-Diagnostics
3612 and 3616 Engines Aftercooler
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.