Idler Gears (Front) - Remove
拆卸步骤
开始:
- 拆卸水泵。 请参阅拆解和组装, "水泵 - 拆卸"。
- 拆卸机油泵。 请参阅拆解和组装, "发动机机油泵 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 卸下 4 个将轴 (2) 固定到位的螺栓。
注: 卸下轴时,切勿使齿轮滑落。
Show/hide table
图 1 | g00561379 |
注: 相同步骤适用于拆卸两侧的惰轮和轴。 每侧的齿轮不同。 必须将齿轮安装在正确的一侧,以便与曲轴齿轮正确接合。
- 在轴 (2) 中安装两个 3/8 英寸的加压螺钉。
- 支撑齿轮 (1) 。 均匀上紧顶出螺钉。 将轴 (2) 从前壳体上卸下。
- 将齿轮 (1) 从前壳体上卸下。
- 将 O 形密封圈 (3) 从轴 (2) 上卸下。
Show/hide table
图 2 | g00561404 |
- 如有必要,从齿轮 (1) 上卸下轴承 (4) 。
Show/hide table
图 3 | g00561405 |
注: 图中的惰轮轴承表示为内部供油的凹槽。 新的惰轮轴承不带内部供油的凹槽。
- 将止推垫圈 (5) 从前壳体上拆下。
Show/hide table
图 4 | g00561407 |
Caterpillar Information System:
G3408 and G3412 Engines Air Inlet and Exhaust System
G3408 and G3412 Engines Ignition System
G3606 and G3608 Engines Idler Gears (Rear) - Install
G3606 and G3608 Engines Idler Gears (Rear) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Disassemble
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines Troubleshooting the ETS Full Protection System (OP, WT, OS)
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Switches
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Install
G3606 and G3608 Engines Camshaft Drive Gear - Install
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Transmitters
G3606 and G3608 Engines Camshaft Drive Gear - Remove
G3408 and G3412 Engines Engine Oil Pressure Indicator
G3606 and G3608 Engines Idler Gears (Front) - Install
G3606 and G3608 Engines Magnetic Pickup - Remove and Install
G3606 and G3608 Engines Housing (Front) - Remove
Digital Voltage Regulator KVAR Regulation
Digital Voltage Regulator Power Factor Regulation
Digital Voltage Regulator Voltage Regulation
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Assemble
Digital Voltage Regulator Line Loss Compensation
G3606 and G3608 Engines Housing (Front) - Install
Digital Voltage Regulator Reactive Voltage Droop
G3408C and G3412C Engines Lubrication System
Digital Voltage Regulator Cross Current Compensation