Housing (Front) - Install
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件说明     | 数量     |
A     | -     | 5/8 英寸导螺栓     | 2     |
B     | 1P-7409     | 吊环螺栓     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将工具 (A) 安装在缸体前部内。
Show/hide table
图 1 | g00562025 |
- 将前壳体垫片 (2) 放置在导螺栓上的合适位置。
- 将管组件 (4) 安装到前壳体 (3) 中。
Show/hide table
图 2 | g00562026 |
- 将工具 (B) 安装在前壳体 (3) 的顶部。 将适当的起吊设备固定到吊环螺栓上。
- 将前壳体放在缸体前部的导螺栓以及定位销上。 安装固定前壳体的螺栓。
- 拆下工具 (A) 。 安装其余的螺栓。
- 将新的 O 形密封圈安装在接头上。 将清洁的发动机机油涂在密封件上。 将接头和套筒 (5) 安装在前壳体中。
Show/hide table
图 3 | g00562028 |
- 将套筒 (6) 安装在前壳体中。
- 调整前壳体垫片 (2) 的底部,使其与缸体底部齐平。
- 均匀地拧紧固定油底壳的螺栓,将油底壳升起。
- 将供油管安装在预润滑泵与配油 T 形管之间。
- 安装吸油管路。
- 向发动机加注机油至恰当油位。 更多信息,请参阅操作和维护手册。
End By:
- 安装优先阀。 请参考 拆解和组装, "优先阀 - 安装"。
- 安装曲轴前油封。 参考 拆解和组装, "曲轴前密封和耐磨衬套 - 安装"。
- 安装前惰轮。 请参阅 拆解和装配, "前惰轮 - 安装"。
- 安装水泵。 请参阅 拆解和组装, "水泵 - 安装"。
- 安装机油滤清器。 请参阅 拆解和装配发动机机油滤清器, "- 安装"。
Caterpillar Information System:
Digital Voltage Regulator Line Loss Compensation
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Assemble
Digital Voltage Regulator Voltage Regulation
Digital Voltage Regulator Power Factor Regulation
Digital Voltage Regulator KVAR Regulation
G3606 and G3608 Engines Housing (Front) - Remove
G3606 and G3608 Engines Magnetic Pickup - Remove and Install
G3606 and G3608 Engines Idler Gears (Front) - Install
G3606 and G3608 Engines Idler Gears (Front) - Remove
G3408 and G3412 Engines Air Inlet and Exhaust System
G3408 and G3412 Engines Ignition System
G3606 and G3608 Engines Idler Gears (Rear) - Install
Digital Voltage Regulator Reactive Voltage Droop
G3408C and G3412C Engines Lubrication System
Digital Voltage Regulator Cross Current Compensation
PM3412C Power Modules Stopping the Engine
797 Off-Highway Truck Hydraulic System Solenoid Valve (Hoist Pilot)
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Sensors
G3606 and G3608 Engines Manual Barring Group - Remove
G3408 and G3412 Engines Cooling System
G3408 and G3412 Engines Basic Block
G3606 and G3608 Engines Manual Barring Group - Install
G3408 and G3412 Engines Electrical System
G3408 and G3412 Engines Air Starting System