Housing (Front) - Remove
拆卸步骤
开始:
- 卸下机油滤清器。 请参阅拆解和装配发动机机油滤清器 -, "拆卸"。
- 拆卸水泵。 请参阅拆解和组装, "水泵 - 拆卸"。
- 卸下前惰轮。 请参阅拆解和组装, "惰轮(前)- 拆卸"。
- 拆下曲轴前油封。 请参阅拆解和装配曲轴前油封和耐磨套筒 - 拆, "卸"。
- 拆下优先阀。 请参阅拆解和组装, "优先阀 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将油底壳排放至低于出油弯头的油位。
- 拆下吸油管路。
- 卸下预润滑泵和机油分销 T 形管之间的供油管。
- 拧松油底壳螺栓,以便有 3.17 mm (0.125 inch) 的间隙。 小心不要损坏油底壳垫片。
- 卸下将油底壳固定在前壳体底部的螺栓。
- 从前壳体卸下套筒 (1) 和接头。 从接头上卸下两个 O 形密封圈。
Show/hide table
图 1 | g00561756 |
- 从前壳体上卸下套筒 (2) 。
- 将螺栓 (5) 从前壳体内侧拆下。
Show/hide table
图 2 | g00561808 |
- 将 3/4 英寸锻造吊环安装在前壳体 (3) 顶部。
- 从前壳体内侧卸下螺栓 (4) 。
- 从前壳体内侧卸下螺栓 (6) 。 小心地从缸体内的销移走前壳体。 拆卸前壳体。 前壳体重约 258 kg (569 lb)。
- 如有必要,从前壳体 (3) 卸下管组件 (7) 。
Show/hide table
图 3 | g00561819 |
- 从缸体前部卸下垫片 (9) 。
Show/hide table
图 4 | g00561820 |
Caterpillar Information System:
G3606 and G3608 Engines Magnetic Pickup - Remove and Install
G3606 and G3608 Engines Idler Gears (Front) - Install
G3606 and G3608 Engines Idler Gears (Front) - Remove
G3408 and G3412 Engines Air Inlet and Exhaust System
G3408 and G3412 Engines Ignition System
G3606 and G3608 Engines Idler Gears (Rear) - Install
G3606 and G3608 Engines Idler Gears (Rear) - Remove
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Disassemble
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines Troubleshooting the ETS Full Protection System (OP, WT, OS)
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Switches
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Install
G3606 and G3608 Engines Camshaft Drive Gear - Install
Digital Voltage Regulator KVAR Regulation
Digital Voltage Regulator Power Factor Regulation
Digital Voltage Regulator Voltage Regulation
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Assemble
Digital Voltage Regulator Line Loss Compensation
G3606 and G3608 Engines Housing (Front) - Install
Digital Voltage Regulator Reactive Voltage Droop
G3408C and G3412C Engines Lubrication System
Digital Voltage Regulator Cross Current Compensation
PM3412C Power Modules Stopping the Engine
797 Off-Highway Truck Hydraulic System Solenoid Valve (Hoist Pilot)
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Sensors