Manual Barring Group - Remove
手摇盘车总成（1：1 的比例）的拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 断开连接 (4) 。
Show/hide table
 | |
| 图 1 | g00562377 |
- 卸下四个螺栓 (2) 。
- 拧松发动机缸体内两个销 (1) 上的手摇盘车总成。
- 卸下手摇盘车总成 (3) 。
手摇盘车总成（50：1 的比例）的拆卸步骤
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将两个空气软管 (3) 从手摇盘车总成 (2) 上断开。
Show/hide table
 | |
| 图 2 | g00562375 |
- 卸下将手摇盘车总成固定在后壳体上的四个螺栓 (1) 。 卸下手摇盘车总成 (2) 。
Caterpillar Information System:
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Sensors
797 Off-Highway Truck Hydraulic System Solenoid Valve (Hoist Pilot)
PM3412C Power Modules Stopping the Engine
Digital Voltage Regulator Cross Current Compensation
G3408C and G3412C Engines Lubrication System
Digital Voltage Regulator Reactive Voltage Droop
G3606 and G3608 Engines Housing (Front) - Install
Digital Voltage Regulator Line Loss Compensation
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Assemble
Digital Voltage Regulator Voltage Regulation
Digital Voltage Regulator Power Factor Regulation
Digital Voltage Regulator KVAR Regulation
G3408 and G3412 Engines Cooling System
G3408 and G3412 Engines Basic Block
G3606 and G3608 Engines Manual Barring Group - Install
G3408 and G3412 Engines Electrical System
G3408 and G3412 Engines Air Starting System
3600 Heavy Fuel Engines Model View Illustrations
G3408 and G3412 Engines Ignition System
3412E, C30 and C32 Marine Engines Flywheel - Remove
G3408 and G3412 Engines Fuel System
3600 Heavy Fuel Engines Gauges and Indicators
G3606 and G3608 Engines Manual Barring Group - Disassemble
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Control Panel (Engine)