Manual Barring Group - Install
手摇盘车总成(1:1 的比例)的安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将手摇盘车总成 (3) 安置于发动机缸体的两个销 (1) 上。
Show/hide table
图 1 | g00562377 |
- 安装四个螺栓 (2) 。
- 连接接头 (4) 。
手摇盘车总成(50:1 的比例)的安装步骤
- 将手摇盘车总成 (2) 安置于发动机缸体上。
Show/hide table
图 2 | g00562375 |
- 安装将手摇盘车总成固定至后壳体的四个螺栓 (1) 。
注: 在装配手摇盘车总成期间,支架组件可能有所偏斜。 安装四个螺栓 (1) ,用手拧紧。 操作把手和轴,以便正确定位支架组件。 然后拧紧螺栓 (1) 。
- 将两个空气软管 (3) 连接至手摇盘车总成 (2) 。
Caterpillar Information System:
G3408 and G3412 Engines Basic Block
G3408 and G3412 Engines Cooling System
G3606 and G3608 Engines Manual Barring Group - Remove
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Sensors
797 Off-Highway Truck Hydraulic System Solenoid Valve (Hoist Pilot)
PM3412C Power Modules Stopping the Engine
Digital Voltage Regulator Cross Current Compensation
G3408C and G3412C Engines Lubrication System
Digital Voltage Regulator Reactive Voltage Droop
G3606 and G3608 Engines Housing (Front) - Install
Digital Voltage Regulator Line Loss Compensation
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Assemble
G3408 and G3412 Engines Electrical System
G3408 and G3412 Engines Air Starting System
3600 Heavy Fuel Engines Model View Illustrations
G3408 and G3412 Engines Ignition System
3412E, C30 and C32 Marine Engines Flywheel - Remove
G3408 and G3412 Engines Fuel System
3600 Heavy Fuel Engines Gauges and Indicators
G3606 and G3608 Engines Manual Barring Group - Disassemble
G3408C, G3412C, G3508, G3512 and G3516 Gas Engine Driven Chillers Control Panel (Engine)
G3606 and G3608 Engines Manual Barring Group - Assemble
G3408 and G3412 Engines Air Inlet And Exhaust System
G3606 and G3608 Engines Housing (Rear) - Remove