Generator Set Control Panel for Switchgear Conversion Caterpillar


Component Location

Usage:

3412C 4BZ



Illustration 1g00493397

(1) Caterpillar Monitoring System "SCROLL" switch.

(2) Caterpillar Monitoring System "CLEAR/MODE" switch.

(3) Caterpillar Monitoring System "LH/RH SELECT" switch.

(4) Caterpillar Monitoring System.

(5) "PUMP STOP" switch (optional on 3412 engines only).

(6) Fault Reset Switch (Standard on 3412 engines and 3500 MUI engines only. Not available on 3500 EUI).

(7) "PUMP RUN" switch (optional on 3412 engines only).

(8) ECS: Engine control switch.

(9) ESPB: emergency stop push button.

(10) Gauge cluster module II.

(11) Gauge cluster module I.

(12) Caterpillar Monitoring System main display module.




Illustration 2g00493685

Back Of Instrument Panel

(1) Caterpillar Monitoring System "SCROLL" switch.

(2) Caterpillar Monitoring System "CLEAR/MODE" switch.

(3) Caterpillar Monitoring System "LH/RH SELECT" switch.

(4) Caterpillar Monitoring System.

(5) "PUMP STOP" switch (optional on 3412 engines only).

(6) Fault Reset switch (Standard on 3412 engines and 3500 MUI engines only. Not available on 3500 EUI.).

(7) "PUMP RUN" switch (optional on 3412 engines only).

(8) Engine control switch.

(9) Emergency stop push button.

(10) Gauge cluster module II.

(11) Gauge cluster module I.

(12) Caterpillar Monitoring System main display module.




Illustration 3g00551447

Instrument Panel - Customer Connection Box ( 3500 MUI engines only)

(13) Cylinder pyrometer (optional).

(14) Earth fault relay (optional)

(15) Arming relay (optional).

(16) Heater contactor.

(17) Battery charger (optional).

(18) Bearing temperature relays (optional).

(19) Alternator temperature relays (optional).

(20) Kilowatt relays (optional).

(21) General alarm relay (optional).

(22) Digital voltage regulator.

(23) Potential transformer.




Illustration 4g00525090

Instrument Panel Interior - 3500 EUI Subpanel.

(24) Signal converter.

(25) Ether hold in relay.

(26) Ether pull in relay.

(27) Air shutoff relay.

(28) Not in AUTO relay.

(29) Relay.

(30) Slave relay.

(31) Fuse 27 (F27) Air shutoff fuse.

(32) Fuse 15 (F15) Battery charger fuse.

(33) Fuse 1 (F1) Main DC fuse.

(34) Fuse 11 (F11) Phase A generator AC voltage fuse.

(35) Fuse 13 (F13) Phase C generator AC voltage fuse.




Illustration 5g00724413

Control Panel Interior - 3412 MUI Subpanel And 3500 Subpanel

(36) 2301A Speed Control.

(37) ASOR: Air shutoff relay.

(38) NIAR: Not in AUTO relay.

(39) SR: Slave relay.

(40) Fuse 27 (F23) Automatic Fuel Transfer Switch 1.

(41) Fuse 15 (F15) Battery Charger Fuse.

(42) Fuse 1 (F1) Main DC fuse.

(44) AR: Arming relay.

(45) Fuse 11 (F11) Phase A generator AC voltage fuse.

(46) Fuse 13 (F13) Phase C generator AC voltage fuse.

(47) Terminal block.




Illustration 6g00552222

Control Panel Interior - 3412 PEEC Subpanel

(48) PWM converter.

(49) NIAR: Not In AUTO relay

(50) SR: Slave relay

(51) Fuse 23 (F23) Automatic fuel transfer switch 1.

(52) Fuse 15 (F15) Battery charger fuse.

(53) Fuse 1 (F1) Main DC fuse.

(54) Fuse 11 (F11) Phase A generator AC voltage fuse.

(55) Fuse 13 (F13) Phase C generator AC voltage fuse.

(56) AR: Arming relay.

(57) Terminal blocks.




Illustration 7g00794228

3412 Customer Connection Box

Right-side view of control panel with side cover removed

(61) DC compartment

(62) Heater Contactor (HC) (optional)

(63) Fuses

(64) AC compartment

The DC compartment (61) contains the customer connections that are used for remote signals such as the general alarm output, generator running contact or the interconnections for the remote annunciator. The AC compartment (64) is used to house the AC fuses and controls for the optional space heater, optional engine heaters and the optional fuel transfer pump. The AC compartment (64) is also the place for customer interconnections of the AC supply to power these optional AC devices.




Illustration 8g00724439

Control Panel - Bottom View

(65) AC and DC connector - from customer connection box.

(66) AC connector - from generator.

(67) DC connector - from engine.

(68) DC connector - from engine.

(69) Not used on 3412 gensets.




Illustration 9g00493446

Junction Box (for ETS) - Cover Removed

Located on exterior of generator terminal box - 3412 only.

(70) Starting motor magnetic switch.

(71) Starting motor magnetic switch (starting system option and charging system option).

(72) Pinion solenoid circuit breaker.

(73) Charging Alternator circuit breaker.

(74) Circuit breaker.

(75) Fuel control relays.




Illustration 10g00794237

The Junction Box is located on the exterior of the generator terminal box - 3412 only.

(76) Starting motor magnetic switch.

(77) Starting motor magnetic switch (starting and charging system option).

(78) Pinion solenoid circuit breaker.

(79) Charging Alternator circuit breaker.

(80) Fuel control (fuse).

(81) Fuel control relays.

Caterpillar Information System:

3054 and 3056 Industrial and Generator Set Engines Engine Oil Cooler - Remove
3408E and 3412E Engines for Caterpillar Built Machines Fuel Transfer Pump
3606 and 3608 Engines General Information (Lubrication System)
P16, P20, P25, P28, P40 and P60 Pulverizers Gerotor Motor - Disassemble
Generator Set Control Panel for Switchgear Conversion Clear/Mode Switch - Troubleshoot
P16, P20, P25, P28, P40 and P60 Pulverizers Gerotor Motor - Install
Generator Set Control Panel for Switchgear Conversion Charging System - Test
Generator Set Control Panel for Switchgear Conversion CID 0263 FMI 04 Sensor Power Supply Voltage Below Normal - Test
G3408 and G3412 Engines Governor Linkage
Generator Set Control Panel for Switchgear Conversion CID 0271 FMI 06 Alarm (Action) Current Above Normal - Test
G3408 and G3412 Engines Governor Control
G3408 and G3412 Engines Governor
SR4 HV and SR4B HV Generators Before Starting Engine
3054 Engine for Caterpillar Built Machines Housing (Front) - Remove
3054 Engine for Caterpillar Built Machines Housing (Front) - Install
3054 Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
SR4 HV and SR4B HV Generators Walk-Around Inspection
3054 Truck Engine Rocker Shaft and Pushrod - Install
3054 Engine for Caterpillar Built Machines Rocker Shaft - Disassemble
Generator Set Control Panel for Switchgear Conversion Cycle Crank - Adjust
3408E and 3412E Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
3054 Engine for Caterpillar Built Machines Rocker Shaft - Assemble
Generator Set Control Panel for Switchgear Conversion Cycle Crank
3054 Truck Engine Cylinder Head - Remove - 3054 and 3054B Engines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.