PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC MAIN CONTROL VALVE COVER ON CERTAIN 365B L EXCAVATORS
Usage:
SEBE8058
July 11, 2002
O-136
Show/hide table
| After failure only |
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC MAIN CONTROL VALVE COVER ON CERTAIN 365B L EXCAVATORS |
|
| 5051-MV 5481 |
PS50428
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
July 31, 2004PROBLEM
The hydraulic main control valve cover may need to be replaced on certain 365B L Excavators. The 1999707 Cover may leak at the 6V5555 O-Ring Seal. Repeat oil leaking at the seal area may occur due to inadequate material at the main control valve body to support the seal. A new 2117943 Cover will provide a better sealing by enabling the use of a smaller 6V5586 O-Ring Seal.AFFECTED PRODUCT
Show/hide table
| Model |
|
| 365B L |
|
PARTS NEEDED
Show/hide table
|
|
|
|
| 6 | 1P3706 | SEAL-RECTANG |
| 4 | 6V5586 | SEAL-O-RING |
| 2 | 2117943 | COVER |
ACTION REQUIRED
See the attached procedure.SERVICE CLAIM ALLOWANCES
Show/hide table
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
0-Up Months |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Attach. (1-Rework Procedure)
REWORK PROCEDURE
- Park the machine on level ground. Lower the bucket to the ground so that the stick is vertical.
- Create a vacuum in the hydraulic tank as to minimize oil loss.
- Remove the 1999707 Covers from the main control valve. See Illustration 1.
- Remove the orifice plugs from the 1999707 Covers and install them onto the new 2117943 Covers accordingly. See Illustration 2.
- Install the new covers onto the main control valve group with the new 6V5586 O-Rings and 1P3706 Seals.
Illustration 1 - Location of 199-9787 Cover
Illustration 2 - Location of 6V-5555 Seal
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM REPLACING ONE FRONT LINKAGE PIN ON CERTAIN UHD MACHINES, 345HD, 345BII, 365B L AND 5080 EXCAVATORS PRODUCT IMPROVEMENT PROGRAM REPLACING ONE FRONT LINKAGE PIN ON CERTAIN UHD MACHINES, 345HD, 345BII, 365B L AND 5080 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 8X0496, 8X0497, 160-6279, AND 160-6280 AXLE SHAFTS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 8X0496, 8X0497, 160-6279, AND 160-6280 AXLE SHAFTS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL ON CERTAIN M312, M315, M318, AND M320 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL ON CERTAIN M312, M315, M318, AND M320 WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1626275 HYDRAULIC OIL COOLER THAT MAY CRACK AND LEAK ON CERTAIN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1626275 HYDRAULIC OIL COOLER THAT MAY CRACK AND LEAK ON CERTAIN 365B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR LEAKS ON CERTAIN 365 B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR LEAKS ON CERTAIN 365 B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BRAKE, PILOT, AND STEERING PUMP GROUP ON CERTAIN M318 AND M320 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE BRAKE, PILOT, AND STEERING PUMP GROUP ON CERTAIN M318 AND M320 WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HIGH-PRESSURE HOSES FOR BOOM CYLINDER ON CERTAIN 312C L EXCAVATORS EQUIPPED WITH HYDRAULIC ADJUSTABLE BOOM PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HIGH-PRESSURE HOSES FOR BOOM CYLINDER ON CERTAIN 312C L EXCAVATORS EQUIPPED WITH HYDRAULIC ADJUSTABLE BOOM
PRODUCT IMPROVEMENT PROGRAM REPLACING ONE FRONT LINKAGE PIN ON CERTAIN 365B L MATERIAL HANDLERS PRODUCT IMPROVEMENT PROGRAM REPLACING ONE FRONT LINKAGE PIN ON CERTAIN 365B L MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING HYDRAULIC HOSE ASSEMBLIES THAT BLISTER ON CERTAIN 320B EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING HYDRAULIC HOSE ASSEMBLIES THAT BLISTER ON CERTAIN 320B EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWING STEM ON CERTAIN 365B L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SWING STEM ON CERTAIN 365B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC MAIN CONTROL VALVE COVER ON CERTAIN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC MAIN CONTROL VALVE COVER ON CERTAIN 365B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUGS ON THE CONTROL VALVE ON CERTAIN 320C AND 320C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUGS ON THE CONTROL VALVE ON CERTAIN 320C AND 320C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOUSING BOLTS ON CERTAIN 3176C ENGINES IN 345B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOUSING BOLTS ON CERTAIN 3176C ENGINES IN 345B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOUSING BOLTS ON CERTAIN 3196 ENGINES IN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOUSING BOLTS ON CERTAIN 3196 ENGINES IN 365B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR AIR CONDITIONER REWORK ON CERTAIN 322C, 322C L, 325C, 325C L, 330C, AND 330C L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR AIR CONDITIONER REWORK ON CERTAIN 322C, 322C L, 325C, 325C L, 330C, AND 330C L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAVEL MOTOR ON CERTAIN 330B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAVEL MOTOR ON CERTAIN 330B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET POWER LINK ON CERTAIN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET POWER LINK ON CERTAIN 365B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STACKABLE VALVE SECTION IN THE GRAPPLE ROTATE HYDRAULIC CIRCUIT ON CERTAIN 322C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STACKABLE VALVE SECTION IN THE GRAPPLE ROTATE HYDRAULIC CIRCUIT ON CERTAIN 322C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED HEUI INJECTORS ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 24H MOTOR GRADERS; 5110B EXCAVATORS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 769D PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED HEUI INJECTORS ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 24H MOTOR GRADERS; 5110B EXCAVATORS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 769D
PRODUCT SUPPORT PROGRAM FOR REPLACING A BOOM THAT CRACKED AT THE TOP PLATE UNDER THE BRACKETS SUPPORTING THE STICK CYLINDER ON CERTAIN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING A BOOM THAT CRACKED AT THE TOP PLATE UNDER THE BRACKETS SUPPORTING THE STICK CYLINDER ON CERTAIN 365B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TWO SPEED SHIFTING SPOOL IN THE TRAVEL MOTORS ON CERTAIN 330C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TWO SPEED SHIFTING SPOOL IN THE TRAVEL MOTORS ON CERTAIN 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE XT5 HOSE ASSEMBLY ON CERTAIN 320C AND 320C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE XT5 HOSE ASSEMBLY ON CERTAIN 320C AND 320C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A CHECK VALVE ON CERTAIN BA18 HYDRAULIC ANGLE BROOMS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A CHECK VALVE ON CERTAIN BA18 HYDRAULIC ANGLE BROOMS