PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOUSING BOLTS ON CERTAIN 3196 ENGINES IN 365B L EXCAVATORS
Usage:
SEBE8067
July 17, 2002
U-169
O-144
Show/hide table
| before
or after failure |
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOUSING BOLTS ON CERTAIN 3196 ENGINES IN 365B L EXCAVATORS | |
| 1162 |
PS40989
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
July 31, 2004PROBLEM
6V2317 bolts may loosen in the front housing group of some 3196 engines in 365B L excavators. This cause an oil leak between the front housing group and the engine block. The fix is to replace the bolts by higher grade bolts and use a new graphite gasket.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 365B L |
|
PARTS NEEDED
1 - 8T9022 GASKET-SILIC1 - 2164781 GASKET KIT
ACTION REQUIRED
- Refer to Service Manual form number RENR1223:- Housing (Front) Remove
- Housing (Front) Install
- See Special Instruction REHS1189-00 - C-10/C-12/3176C/3196 Front Housing Bolts. This special instruction explains the installation of the new bolts and the new gasket.
SERVICE CLAIM ALLOWANCES
Show/hide table
Product smu/age whichever comes first |
|
|
|
|||
Parts |
|
|
|
|
|
|
|
0-60 Mos |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOUSING BOLTS ON CERTAIN 3176C ENGINES IN 345B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOUSING BOLTS ON CERTAIN 3176C ENGINES IN 345B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACIING THE 7N5378 MUI FUEL LEVER ON CERTAIN 3508, 3512, AND 3516 INDUSTRIAL, MARINE, AND GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC MAIN CONTROL VALVE COVER ON CERTAIN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC MAIN CONTROL VALVE COVER ON CERTAIN 365B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM REPLACING ONE FRONT LINKAGE PIN ON CERTAIN UHD MACHINES, 345HD, 345BII, 365B L AND 5080 EXCAVATORS PRODUCT IMPROVEMENT PROGRAM REPLACING ONE FRONT LINKAGE PIN ON CERTAIN UHD MACHINES, 345HD, 345BII, 365B L AND 5080 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 8X0496, 8X0497, 160-6279, AND 160-6280 AXLE SHAFTS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 8X0496, 8X0497, 160-6279, AND 160-6280 AXLE SHAFTS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL ON CERTAIN M312, M315, M318, AND M320 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW PUMP DRIVE SHAFT SEAL ON CERTAIN M312, M315, M318, AND M320 WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1626275 HYDRAULIC OIL COOLER THAT MAY CRACK AND LEAK ON CERTAIN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1626275 HYDRAULIC OIL COOLER THAT MAY CRACK AND LEAK ON CERTAIN 365B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR LEAKS ON CERTAIN 365 B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR LEAKS ON CERTAIN 365 B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BRAKE, PILOT, AND STEERING PUMP GROUP ON CERTAIN M318 AND M320 WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE BRAKE, PILOT, AND STEERING PUMP GROUP ON CERTAIN M318 AND M320 WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HIGH-PRESSURE HOSES FOR BOOM CYLINDER ON CERTAIN 312C L EXCAVATORS EQUIPPED WITH HYDRAULIC ADJUSTABLE BOOM PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HIGH-PRESSURE HOSES FOR BOOM CYLINDER ON CERTAIN 312C L EXCAVATORS EQUIPPED WITH HYDRAULIC ADJUSTABLE BOOM
PRODUCT IMPROVEMENT PROGRAM REPLACING ONE FRONT LINKAGE PIN ON CERTAIN 365B L MATERIAL HANDLERS PRODUCT IMPROVEMENT PROGRAM REPLACING ONE FRONT LINKAGE PIN ON CERTAIN 365B L MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING HYDRAULIC HOSE ASSEMBLIES THAT BLISTER ON CERTAIN 320B EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING HYDRAULIC HOSE ASSEMBLIES THAT BLISTER ON CERTAIN 320B EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR AIR CONDITIONER REWORK ON CERTAIN 322C, 322C L, 325C, 325C L, 330C, AND 330C L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR AIR CONDITIONER REWORK ON CERTAIN 322C, 322C L, 325C, 325C L, 330C, AND 330C L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAVEL MOTOR ON CERTAIN 330B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRAVEL MOTOR ON CERTAIN 330B L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET POWER LINK ON CERTAIN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET POWER LINK ON CERTAIN 365B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STACKABLE VALVE SECTION IN THE GRAPPLE ROTATE HYDRAULIC CIRCUIT ON CERTAIN 322C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STACKABLE VALVE SECTION IN THE GRAPPLE ROTATE HYDRAULIC CIRCUIT ON CERTAIN 322C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED HEUI INJECTORS ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 24H MOTOR GRADERS; 5110B EXCAVATORS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 769D PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED HEUI INJECTORS ON CERTAIN 3408E AND 3412E POWERED 836 COMPACTORS; 834B AND 844 WHEEL DOZERS; 988F AND 990 WHEEL LOADERS; 24H MOTOR GRADERS; 5110B EXCAVATORS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 769D
PRODUCT SUPPORT PROGRAM FOR REPLACING A BOOM THAT CRACKED AT THE TOP PLATE UNDER THE BRACKETS SUPPORTING THE STICK CYLINDER ON CERTAIN 365B L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING A BOOM THAT CRACKED AT THE TOP PLATE UNDER THE BRACKETS SUPPORTING THE STICK CYLINDER ON CERTAIN 365B L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TWO SPEED SHIFTING SPOOL IN THE TRAVEL MOTORS ON CERTAIN 330C EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TWO SPEED SHIFTING SPOOL IN THE TRAVEL MOTORS ON CERTAIN 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE XT5 HOSE ASSEMBLY ON CERTAIN 320C AND 320C L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE XT5 HOSE ASSEMBLY ON CERTAIN 320C AND 320C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A CHECK VALVE ON CERTAIN BA18 HYDRAULIC ANGLE BROOMS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A CHECK VALVE ON CERTAIN BA18 HYDRAULIC ANGLE BROOMS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM TO STICK JOINT PIN ON CERTAIN 375 AND 375L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BOOM TO STICK JOINT PIN ON CERTAIN 375 AND 375L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING AND TIGHTENING THE REAR AXLE SPINDLE BOLTS ON CERTAIN M325B MATERIAL HANDLERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING AND TIGHTENING THE REAR AXLE SPINDLE BOLTS ON CERTAIN M325B MATERIAL HANDLERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VISORS AND HEADLINERS ON CERTAIN 322C, 325C AND 330C HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE VISORS AND HEADLINERS ON CERTAIN 322C, 325C AND 330C HYDRAULIC EXCAVATORS