New Hinge Mounting Plates for Radiator Door are Used on Certain 836K Landfill Compactors and 988K Wheel Loaders {1356, 1359, 7155} Caterpillar


New Hinge Mounting Plates for Radiator Door are Used on Certain 836K Landfill Compactors and 988K Wheel Loaders {1356, 1359, 7155}

Usage:

988K L8X
Landfill Compactor
836K (S/N: T6X1-102; LWZ1-232; TWZ1-707)
Wheel Loader
988K (S/N: T8E1-125; L8X1-241; LWX1-811; TWX1-706)

Description Of Change: New hinge mounting plates for radiator door are used on the machines listed above. The new mounting plates correct the alignment of the radiator door in the open position to allow for easier access to clean the radiator cores.

Adaptable To: The new hinge mounting plates are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.

------ WARNING! ------

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.


Table 1
Required Parts 
Item  Qty  New Part Number  Part Name  Former Part Number(1) 
533-4841  Plate  363-3348 
539-0069  Plate  363-3348 
8T-4178  Bolt  - 
8T-4198  Bolt  - 
539-0068  Plate  363-3348 
5G-2514  Tube  - 
(1) The former part number listed is for reference only and may differ.


Illustration 1g06405292
Top hinge mount on Right-Hand side of 363-3345 Fan Support Gp
(1) 533-4841 Plate
(2) 539-0069 Plate
(3) 8T-4178 Bolt

The new 533-4841 Plate (1) and 539-0069 Plate (2) replaces the former two 363-3348 Plates at the top hinge mount, shown in Illustration 1. Secure the plates using existing four 7X-7729 Washers and four 8T-4178 Bolts (3).



Illustration 2g06405293
Bottom hinge mount on Right-Hand side of 363-3345 Fan Support Gp
(2) 539-0069 Plate
(4) 8T-4198 Bolt

The new two 539-0069 Plates (2) replaces the former two 363-3348 Plates at the bottom hinge mount, shown in Illustration 2. Secure the plates using existing four 7X-7729 Washers and four 8T-4198 Bolts (4).



Illustration 3g06405294
Typical example of Right-Hand side hinge mounts of 347-4981 Radiator Guard Gp on 836K Landfill Compactors and 390-8394 Radiator Guard Gp on 988K Wheel Loaders
(5) 539-0068 Plate
(6) 5G-2514 Tube

The new two 539-0068 Plates (5) with 5G-2514 Tube (6) replaces the former 363-3336 Plate of 347-4981 Radiator Guard Gp on 836K Landfill Compactors and 390-8394 Radiator Guard Gp on 988K Wheel Loaders. Refer to Illustration 3.

Caterpillar Information System:

794 AC Off-Highway Truck Machine Systems Electric Starting Motor - Mounting ( Rotor Lock )
The Hoist Cylinder Head is Improved on Certain 797 Off-Highway Trucks {5102} The Hoist Cylinder Head is Improved on Certain 797 Off-Highway Trucks {5102}
Brake Hydraulic Tube Assemblies are Positioned Wrong on Certain CUV85, CUV102D, CUV105D, CUV82 Utility Vehicles {4257, 4265} Brake Hydraulic Tube Assemblies are Positioned Wrong on Certain CUV85, CUV102D, CUV105D, CUV82 Utility Vehicles {4257, 4265}
Procedure to Improve AC Inverter Cabinet Motor Control and ECM Wiring on Certain 794 AC Off-Highway Trucks {1408, 1421, 4822, 7610} Procedure to Improve AC Inverter Cabinet Motor Control and ECM Wiring on Certain 794 AC Off-Highway Trucks {1408, 1421, 4822, 7610}
The Final Drive Group is Improved on Certain 794 AC Off-Highway Trucks {4050, 4084} The Final Drive Group is Improved on Certain 794 AC Off-Highway Trucks {4050, 4084}
Diesel Exhaust Fluid (DEF) Tank Leaks on Certain D Series Telehandler {108K, 108T} Diesel Exhaust Fluid (DEF) Tank Leaks on Certain D Series Telehandler {108K, 108T}
Installation Procedure For A Machine Lifting Kit For Certain D-Series Skid-Steer Loaders, Compact Track Loaders, and Multi Terrain Loaders {6459, 7000} Installation Procedure For A Machine Lifting Kit For Certain D-Series Skid-Steer Loaders, Compact Track Loaders, and Multi Terrain Loaders {6459, 7000}
The Left-Hand Door Group May Crack on Certain 777E Off-Highway Trucks {7308} The Left-Hand Door Group May Crack on Certain 777E Off-Highway Trucks {7308}
Primary Engine Intake Filter May Fail on Certain 816K Landfill Compactors {1051, 105A} Primary Engine Intake Filter May Fail on Certain 816K Landfill Compactors {1051, 105A}
PM310, PM312, and PM313 Cold Planer Operator Controls
Rework Procedures for the Heater Hold Down on Certain Asphalt Pavers and Screeds is Now Available {5701, 7610, 7620} Rework Procedures for the Heater Hold Down on Certain Asphalt Pavers and Screeds is Now Available {5701, 7610, 7620}
794 AC Off-Highway Truck Machine Systems Hydraulic Tank
New Cat® Object Detect Software (Monitor Software) Version is Now Available for Certain Applications on Certain Machines {7610, 7620} New Cat® Object Detect Software (Monitor Software) Version is Now Available for Certain Applications on Certain Machines {7610, 7620}
PM310, PM312, and PM313 Cold Planer Shipping the Machine
Operator Seat Belt Not Retracting {7327} Operator Seat Belt Not Retracting {7327}
Regulatory Compliance Information Product Link - PL641 V2 - If Equipped
Head Gasket May Fail On Certain Cat® Products {1100} Head Gasket May Fail On Certain Cat® Products {1100}
A Procedure to Rework the Throttle Pedal Base Plate is now available for Certain Load Haul Dump Machines. {1269} A Procedure to Rework the Throttle Pedal Base Plate is now available for Certain Load Haul Dump Machines. {1269}
794 AC Off-Highway Truck Machine Systems Wiring - Cab
Correct Product ID is Now Being Set on Cat® Product Link Devices (Telematics Boxes) Used on Machines Programmed From the Factory {7606} Correct Product ID is Now Being Set on Cat® Product Link Devices (Telematics Boxes) Used on Machines Programmed From the Factory {7606}
794 AC Off-Highway Truck Machine Systems Wiring - Platform
Cat ® Command for Dozing, Gen 3.5 Remote Control Operator Console with RFID for D9T Track Type Tractor User Interface
Installation Procedure for Blade Slope Indication (IMU Sensor) kit on Certain Motor Graders {1408, 1439, 1901, 7490, 7620} Installation Procedure for Blade Slope Indication (IMU Sensor) kit on Certain Motor Graders {1408, 1439, 1901, 7490, 7620}
Fuel Dilution of Engine Oil May Occur on Certain C27 and C32 Machine Engines {1290} Fuel Dilution of Engine Oil May Occur on Certain C27 and C32 Machine Engines {1290}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.