Compression Brake - Assemble
组装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安装活塞 (14) 、, 卡子 (17) 、垫圈 (16) 和三根螺栓 (15) 。
Show/hide table
图 1 | g00471086 |
- 安装活塞 (9) 、弹簧 (10) 和 (11) 以及压缩制动上三个不同位置的卡子 (12) 。 安装三个挡圈 (13) 。
Show/hide table
图 2 | g00471085 |
- 安装活塞 (8),、弹簧 (3) 和 (4) 、隔套 (5) 、以及油杯 (6) 和卡环 (7) 。
Show/hide table
图 3 | g00471084 |
- 安装 O 型密封圈。 安装机油管子 (1) 和 (2) 。
Show/hide table
图 4 | g00471083 |
注: 如果 O 型密封圈磨损或损坏,则应使用新零件更换。
End By: 安装压缩制动器。 请参考 解体与组装, "压缩制动器 - 安装"。
Caterpillar Information System:
G3612 and G3616 Engines Flexible Drive
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Disassemble
G3606 and G3608 Engines Flexible Coupling
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Install
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Remove
3306B Industrial Engine Engine Oil Cooler - Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
G3606 and G3608 Engines Gas Engine Ignition
G3606 and G3608 Engines Fuel Lines
G3606 and G3608 Engines Water Temperature Regulator
3612 and 3616 Engines Water Temperature Regulator
3306C Truck Engine Turbocharger - Remove
G3606 and G3608 Engines Fuel Control
3406E, C-10 and C-12 Truck Engines Belt - Inspect
G3612 and G3616 Engines Pressure Switch
3306C Truck Engine Turbocharger - Install
G3606 and G3608 Engines Exhaust Bypass Valve
3306C Truck Engine Turbocharger - Disassemble
3306C Truck Engine Turbocharger - Assemble
G3606 and G3608 Engines Air Lines
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil Level - Check
3406E, C-10, C-12, C-15, C-16 Truck Engines Cylinder Head Grounding Stud - Inspect/Clean/Tighten
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil Level Gauge - Calibrate - C-10 and C-12 Engines Only