Flexible Drive
Show/hide table
Illustration 1 | g00471112 |
(1) Bolts
- Torque ... 825 ± 100 N·m (608 ± 74 lb ft)
(2) Spacer assembly
Note: The bolts, nuts and washers that assemble the two halves of the spacer assembly (2) must be removed after the flexible coupling has been installed and prior to engine operation.
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Disassemble
G3606 and G3608 Engines Flexible Coupling
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Install
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Remove
3306B Industrial Engine Engine Oil Cooler - Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
G3606 and G3608 Engines Gas Engine Ignition
G3606 and G3608 Engines Fuel Lines
G3606 and G3608 Engines Water Temperature Regulator
3612 and 3616 Engines Water Temperature Regulator
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Troubleshooting
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Assemble
3306C Truck Engine Turbocharger - Remove
G3606 and G3608 Engines Fuel Control
3406E, C-10 and C-12 Truck Engines Belt - Inspect
G3612 and G3616 Engines Pressure Switch
3306C Truck Engine Turbocharger - Install
G3606 and G3608 Engines Exhaust Bypass Valve
3306C Truck Engine Turbocharger - Disassemble
3306C Truck Engine Turbocharger - Assemble
G3606 and G3608 Engines Air Lines
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Oil Level - Check
3406E, C-10, C-12, C-15, C-16 Truck Engines Cylinder Head Grounding Stud - Inspect/Clean/Tighten