Engine Oil Cooler - Disassemble
解体步骤
开始:
- 拆卸发动机机油冷却器。 请参考解体与组装, "发动机机油冷却器 - 拆卸"。
- 从冷却器芯 (4) 上拆下管 (1) 、两个弯头 (2) 和上盖 (3) 。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
图 1 | g00470817 |
- 用 3.96 mm (.156 in) 的杆 (5) 清洁冷却器芯 (4) 的管子。
注: 应拆下 O 型密封圈并检查有无损坏。 如果 O 型密封圈磨损或损坏,则应使用新零件更换。
Show/hide table
图 2 | g00470818 |
Caterpillar Information System:
G3606 and G3608 Engines Gas Engine Ignition
G3606 and G3608 Engines Fuel Lines
G3606 and G3608 Engines Water Temperature Regulator
3612 and 3616 Engines Water Temperature Regulator
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Troubleshooting
G3606 and G3608 Engines Camshaft
G3612 and G3616 Engines Accessory Drive
G3606 and G3608 Engines Accessory Drive
G3612 and G3616 Engines Gas Engine Ignition
C-10 and C-12 Truck Engines Camshaft
C-10 and C-12 Truck Engines Engine Design
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Cooling System
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
3306B Industrial Engine Engine Oil Cooler - Install
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Remove
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Install
G3606 and G3608 Engines Flexible Coupling
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Disassemble
G3612 and G3616 Engines Flexible Drive
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Assemble
3306C Truck Engine Turbocharger - Remove
G3606 and G3608 Engines Fuel Control
3406E, C-10 and C-12 Truck Engines Belt - Inspect
G3612 and G3616 Engines Pressure Switch