Engine Oil Cooler - Install
Installation Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- The weight of engine oil cooler (2) is 18 Kg (40 lb). Install engine oil cooler (2) and three bolts (4). Connect clip (3) for the engine oil level gauge. Connect hose assembly (5) .
Note: Check the condition of the gaskets. If the gaskets are worn or damaged, use new parts for replacement.
Show/hide table
Illustration 1 | g00468428 |
- Tighten two hose clamps (1) .
Show/hide table
Illustration 2 | g00468427 |
End By: Install the engine oil filter and the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Install".
Caterpillar Information System:
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
G3606 and G3608 Engines Gas Engine Ignition
G3606 and G3608 Engines Fuel Lines
G3606 and G3608 Engines Water Temperature Regulator
3612 and 3616 Engines Water Temperature Regulator
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Troubleshooting
G3606 and G3608 Engines Camshaft
G3612 and G3616 Engines Accessory Drive
G3606 and G3608 Engines Accessory Drive
G3612 and G3616 Engines Gas Engine Ignition
C-10 and C-12 Truck Engines Camshaft
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Remove
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Install
G3606 and G3608 Engines Flexible Coupling
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Disassemble
G3612 and G3616 Engines Flexible Drive
3304B and 3306B Engines for Caterpillar Built Machines Compression Brake - Assemble
3306C Truck Engine Turbocharger - Remove
G3606 and G3608 Engines Fuel Control
3406E, C-10 and C-12 Truck Engines Belt - Inspect
G3612 and G3616 Engines Pressure Switch
3306C Truck Engine Turbocharger - Install
G3606 and G3608 Engines Exhaust Bypass Valve