Engine Support (Rear) - Remove and Install
Start By:
- Remove the rear hood.
- Remove the rear bottom guard.
- Remove access panel (1).
Show/hide table
Illustration 2 g06342004 - Attach suitable lifting device to support the rear of engine and torque converter (2). The weight of engine and torque converter (2) is approximately
3765 kg (8300 lb) .Show/hide tableIllustration 3 g06342006 - Remove two bolts (3) and the washers. Remove upper support (4).
Show/hide table
Illustration 4 g06342010 - Remove two bolts (5) and the washers.
Show/hide table
Illustration 5 g06342004 Show/hide tableIllustration 6 g06343165 - Use suitable lifting device to raise the rear of engine and torque converter (2). Remove lower support (6).
Show/hide table
Illustration 7 g06343169 - Remove six bolts (8) and the washers. Remove rear engine support (7). Repeat steps 3 through 6 for the other side.
Show/hide table
Illustration 1 | g06342002 |
- Install rear engine support (7) in the reverse order of removal.
Caterpillar Information System:
S3015, S3025 and S3035 Demolition and Scrap Shears Swivel - Remove
Hose Clamp Retention Information for 794 AC Off-Highway Truck has Changed {4257, 4304, 5057, 7510, 7540, 7554} Hose Clamp Retention Information for 794 AC Off-Highway Truck has Changed {4257, 4304, 5057, 7510, 7540, 7554}
24 Motor Grader Power Train Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
M315D2 and M317D2 Wheeled Excavators Prepare the Machine for Maintenance
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) Electronic Control Module (ECM) - Configure
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) Electronic Control Module (ECM) - Replace
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) Electronic Control Module (ECM) - Flash Program
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) Wiring Harness (Short Circuit) - Test
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) Wiring Harness (Open Circuit) - Test
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) Electrical Connector - Inspect
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) Tire Sensor - Set
789D CMD Off-Highway Truck Chassis Electronic Control System (Command For Hauling) Position Sensor (Body) - Calibrate
Coolant May Overflow During Engine Warm Up on Certain 785C and 789C Off-Highway Trucks {1070, 1380} Coolant May Overflow During Engine Warm Up on Certain 785C and 789C Off-Highway Trucks {1070, 1380}
Improved Thrust Washer and Wheel Bearing Retainer Are Now Used on Certain 824K Wheel Dozers and 826K Landfill Compactors {4051} Improved Thrust Washer and Wheel Bearing Retainer Are Now Used on Certain 824K Wheel Dozers and 826K Landfill Compactors {4051}
S3015, S3025 and S3035 Demolition and Scrap Shears Swivel - Remove
789D and 789D XQ Off-Highway Trucks Pump Drive Shaft Universal Joint - Inspect
Repair Option for Shaft Assembly Spalling on Certain Integrated Toolcarriers, Wheel Loaders, and Wheel Skidders {3030, 3063, 3155, 3169, 3170} Repair Option for Shaft Assembly Spalling on Certain Integrated Toolcarriers, Wheel Loaders, and Wheel Skidders {3030, 3063, 3155, 3169, 3170}
S3015, S3025 and S3035 Demolition and Scrap Shears Gear and Bearing - Remove and Install
Cleaning Procedure of the Standard Pre-Cleaner Assembly on Certain 836K Landfill Compactors {1055} Cleaning Procedure of the Standard Pre-Cleaner Assembly on Certain 836K Landfill Compactors {1055}
785D Off-Highway Truck Pump Drive Shaft Universal Joint - Inspect
793D Off-Highway Truck Pump Drive Shaft Universal Joint - Inspect
793D Off-Highway Truck Main Drive Shaft Universal Joint - Inspect
S3015, S3025 and S3035 Demolition and Scrap Shears Swivel - Install
12M Series 3, 140M Series 3 and 160M Series 3 Motor Graders Piston Motor (Hydraulic Fan)