Installation Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Show/hide table
Table 1
Tools Required |
Tool |
Part Number |
Part Description |
Qty |
A |
4C-8359 |
Eyebolt |
1 |
B |
- |
Support bar (20 mm * 150 mm * 1000 mm) |
1 |
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned to prevent dirt from entering the internal mechanism.
Show/hide table
|
NOTICE |
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.
Dispose of all fluids according to local regulations and mandates. |
|
Show/hide table
|
|
|
Illustration 1 | g06342167 |
Show/hide table
|
|
|
Illustration 2 | g06342170 |
Show/hide table
|
|
|
Illustration 3 | g06342171 |
Show/hide table
|
|
|
Illustration 4 | g06342173 |
Show/hide table
|
|
|
Illustration 5 | g06342175 |
Show/hide table
|
|
|
Illustration 6 | g06342176 |
Show/hide table
|
|
|
Illustration 7 | g06342178 |
Show/hide table
|
|
|
Illustration 8 | g06342179 |
Show/hide table
|
|
|
Illustration 9 | g06342181 |
Show/hide table
|
|
|
Illustration 10 | g06342182 |
Note: Ensure that the rotor is positioned such that the side with the port closest to the shear housing is on the side of the bracket which is on the operators side when installed on the machine.
Note: Make sure not to damage the O-ring seals or the end face of the stator.
Show/hide table
|
|
|
Illustration 11 | g06342183 |
Show/hide table
|
|
|
Illustration 12 | g06342184 |
Show/hide table
|
|
|
Illustration 13 | g06342186 |