Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Show/hide table
Table 1
| Required Tooling |
| Tool |
Part Number |
Part Description |
Qty |
| A |
439-3940 |
Bracket As |
1 |
Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies to prevent fluid loss and to keep contaminants from entering the system.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned to prevent dirt from entering the internal mechanism.
Show/hide table
|
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.
Dispose of all fluids according to local regulations and mandates. |
|
Show/hide table
|
|
|
| Illustration 1 | g06341928 |
Show/hide table
|
|
|
| Illustration 2 | g06341929 |
Show/hide table
|
|
|
| Illustration 3 | g06341932 |
Show/hide table
|
|
|
| Illustration 4 | g06341937 |
Show/hide table
|
|
|
| Illustration 5 | g06341938 |
Show/hide table
|
|
|
| Illustration 6 | g06341940 |
Show/hide table
|
|
|
| Illustration 7 | g06341941 |
Show/hide table
|
|
|
| Illustration 8 | g06341943 |
Show/hide table
|
|
|
| Illustration 9 | g06341945 |
Show/hide table
|
|
|
| Illustration 10 | g06341948 |
