Automatic Vibration - Adjust
Show/hide table
| |
| Illustration 1 | g01253104 |
The mechanisms in each drum will not activate until the machine has reached a programmed speed.
Note: Currently, there are no means of adjustment on the ECM for the CB-434D and CB-434D XW machines. Activation speed is determined by the software.
Caterpillar Information System:
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
Chassis Electronic Control Module (ECM) May Malfunction By Displaying Active Codes On Certain Off-Highway Trucks {7490, 7494, 7600, 7601, 7610, 7620, 7632} Chassis Electronic Control Module (ECM) May Malfunction By Displaying Active Codes On Certain Off-Highway Trucks {7490, 7494, 7600, 7601, 7610, 7620, 7632}
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
New Monitor Software Is Now Available for Certain Cat® Products {7490, 7494, 7601, 7603, 7610, 7620} New Monitor Software Is Now Available for Certain Cat® Products {7490, 7494, 7601, 7603, 7610, 7620}
C175 Tier 4 Final Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
24 Motor Grader Power Train Final Drive - Assemble
24 Motor Grader Power Train Final Drive - Disassemble
New Optional 3 Inch Wide Seat Belt Is Now Available for Certain Telehandlers {7327} New Optional 3 Inch Wide Seat Belt Is Now Available for Certain Telehandlers {7327}
Improved Software Groups Are Now Used On Certain 740 EJ and 745 Articulated Trucks {1901, 4800, 4801, 7490, 7600, 7610, 7620} Improved Software Groups Are Now Used On Certain 740 EJ and 745 Articulated Trucks {1901, 4800, 4801, 7490, 7600, 7610, 7620}
24 Motor Grader Machine Systems Fan and Piston Motor (Hydraulic Fan) - Remove and Install
PM620 and PM622 Cold Planer Machine Storage
794 AC Off-Highway Truck Machine Systems Rear Suspension (Cylinder) - Disassemble
794 AC Off-Highway Truck Machine Systems Rear Suspension (Cylinder) - Assemble
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Frame - Disassemble
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Frame - Assemble
Procedure to Improve the Charging System on Certain 789D Off-Highway Trucks {1408} Procedure to Improve the Charging System on Certain 789D Off-Highway Trucks {1408}
C7.1 Engines for Caterpillar Built Machines Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
New Pins Are Used in the Axle Support Group and the Rear Housing Group on Certain Off-Highway Trucks {3260, 3268} New Pins Are Used in the Axle Support Group and the Rear Housing Group on Certain Off-Highway Trucks {3260, 3268}
PM820, PM822, and PM825 Cold Planer Machine Systems Final Drive Planetary - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Final Drive Planetary - Assemble
Hydraulic Tubes May Leak on Certain Motor Graders {5068} Hydraulic Tubes May Leak on Certain Motor Graders {5068}
PM820, PM822, and PM825 Cold Planer Balloon Light Connectors
C175 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Head - Remove