Frame - Disassemble
Start By:
- Remove the gear and bearing.
- Remove the gerotor motor.
Show/hide table
| Tool | Part Number | Part Description | Qty |
| A | 422-2352 | Jack Stand | 2 |
- Position frame assembly (1) as shown in illustration 1.
Show/hide table
Illustration 2 g06330803 - Remove pin (3) and pipe (2).
- Remove adapter (4). Repeat to the other side.
Show/hide table
Illustration 3 g06330804 - Remove bolts (5) and disc cover (6).
Show/hide table
Illustration 4 g06330805 - Remove bolt (8) and disc lock (7).
Show/hide table
| |
| Illustration 1 | g06330801 |
Caterpillar Information System:
794 AC Off-Highway Truck Machine Systems Rear Suspension (Cylinder) - Assemble
794 AC Off-Highway Truck Machine Systems Rear Suspension (Cylinder) - Disassemble
CB-434D and CB-434D XW Vibratory Paving Compactor Vibratory System Automatic Vibration - Adjust
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
Chassis Electronic Control Module (ECM) May Malfunction By Displaying Active Codes On Certain Off-Highway Trucks {7490, 7494, 7600, 7601, 7610, 7620, 7632} Chassis Electronic Control Module (ECM) May Malfunction By Displaying Active Codes On Certain Off-Highway Trucks {7490, 7494, 7600, 7601, 7610, 7620, 7632}
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
New Monitor Software Is Now Available for Certain Cat® Products {7490, 7494, 7601, 7603, 7610, 7620} New Monitor Software Is Now Available for Certain Cat® Products {7490, 7494, 7601, 7603, 7610, 7620}
C175 Tier 4 Final Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
24 Motor Grader Power Train Final Drive - Assemble
24 Motor Grader Power Train Final Drive - Disassemble
New Optional 3 Inch Wide Seat Belt Is Now Available for Certain Telehandlers {7327} New Optional 3 Inch Wide Seat Belt Is Now Available for Certain Telehandlers {7327}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Frame - Assemble
Procedure to Improve the Charging System on Certain 789D Off-Highway Trucks {1408} Procedure to Improve the Charging System on Certain 789D Off-Highway Trucks {1408}
C7.1 Engines for Caterpillar Built Machines Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
New Pins Are Used in the Axle Support Group and the Rear Housing Group on Certain Off-Highway Trucks {3260, 3268} New Pins Are Used in the Axle Support Group and the Rear Housing Group on Certain Off-Highway Trucks {3260, 3268}
PM820, PM822, and PM825 Cold Planer Machine Systems Final Drive Planetary - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Final Drive Planetary - Assemble
Hydraulic Tubes May Leak on Certain Motor Graders {5068} Hydraulic Tubes May Leak on Certain Motor Graders {5068}
PM820, PM822, and PM825 Cold Planer Balloon Light Connectors
C175 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Head - Remove
C175 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Head - Install
Improved Hardware to Secure the Engine Oil Cross Under Tube is Now Used on Certain 793D Off Highway Trucks {1307} Improved Hardware to Secure the Engine Oil Cross Under Tube is Now Used on Certain 793D Off Highway Trucks {1307}
Improved LED Lighting Brackets Are Now Used on Certain Medium Wheel Loaders {1430, 1434} Improved LED Lighting Brackets Are Now Used on Certain Medium Wheel Loaders {1430, 1434}