G3606 and G3608 Engines Caterpillar


Engine Design

Usage:

G3608 4WF



图 1g00465539

柴油机设计

(A) 进气

(B) 气体进入阀

(C) 排气

气缸数和气缸布置 ... 直列 8 缸

每气缸气门数

进气门 ... 2
排气门 ... 2
气体进入阀 ... 1

排量 ... 170 L (10352 cu in)

缸径 ... 300 mm (11.8 in)

冲程 ... 300 mm (11.8 in)

压缩比 ... 9.2:1

燃烧方式 ... 火花点火

点火顺序

标准转动 CCW ... 1-6-2-5-8-3-7-4

气门间隙

进气 ... 0.50 mm (.020 in)
排气 ... 1.27 mm (.050 in)
气体进入阀 ... 0.64 mm (.025 in)

从飞轮端观看曲轴时,曲轴沿以下方向旋转。 ... 逆时针

注: 发动机的前端是与发动机飞轮端相对的发动机的另一端。 发动机的左、右侧是从发动机飞轮端来判断的。 第1缸是最前端的气缸。

Caterpillar Information System:

3126 Truck Engine (Military) Before Starting Engine
3306C Truck Engine Engine Oil Pump - Remove
3176C and 3196 Industrial Engines Turbocharger
3208 Marine Engine Engine Air Cleaner Element (Foam) - Clean/Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines Model View Illustrations
3126E and 3126B Commercial and Truck Engines Caterpillar Driver Information Display
3126E and 3126B Commercial and Truck Engines Overhaul Considerations
Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
P16, P20, P25, P28, P40 and P60 Pulverizer Specifications
Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907} Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907}
3126E and 3126B Commercial and Truck Engines Engine Starting
3126E and 3126B Commercial and Truck Engines Mounting and Dismounting
3208 Marine Engine Belt - Inspect/Adjust/Replace
Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466} Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466}
3126 HEUI Industrial Engine Troubleshooting
3304B and 3306B Engines for Caterpillar Built Machines Cylinder Liner - Remove
3208 Marine Engine Engine Air Cleaner Element - Clean/Replace
G3612 and G3616 Engines Magneto
C-10 and C-12 Truck Engines Camshaft
P16, P20, P25, P28, P40 and P60 Pulverizer Crusher Tooth - Rebuild
P16, P20, P25, P28, P40 and P60 Pulverizer Crusher Tooth - Replace
G3606 and G3608 Engines Magneto Drive
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install
Removal Of Broken Head Bolts On 3176 Engines Without Removing The Aluminum Spacer Deck{1100} Removal Of Broken Head Bolts On 3176 Engines Without Removing The Aluminum Spacer Deck{1100}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.