3126E and 3126B Commercial and Truck Engines Caterpillar


Engine Starting

Usage:

3126B 1AJ
如果发动机起动开关或控制装置上挂系了警告标签的话,不要起动发动机或移动如何控制装置。 同时也不要解除停车制动。 在起动发动机前,要向挂系警告标签的人咨询。

如果进行维修作业时必须起动发动机,必须安装好所有保护罩、盖。 为了预防旋转件引起事故,在旋转件周围工作要小心。

应从驾驶员操作室(驾驶室)起动发动机。 决不要靠短接起动马达接线端或蓄电池来起动发动机。 这样做会旁通发动机空挡起动系统和/或电气系统可能会受到损坏。

一定要按照操作和保养手册, "发动机起动"专题(操作部分)中描述的程序来起动发动机。 了解正确的起动步骤有助于防止发动机零部件的重大损坏。 了解正确起动步骤有助于防止人身伤害。

为了确保水套水加热器(如有配备)和/或润滑油加热器(如有配备)工作正常,在加热器工作期间,要检查水温和油温。

发动机排气含有对人体有害的燃烧产物。 一定要在通风良好的地方起动和运行发动机。 如果在一个密闭的空间起动发动机,要将发动机废气排到室外去。

乙醚

乙醚是有毒且易燃的物质。 不要吸入乙醚和让乙醚与皮肤接触。 否则可能会造成人身伤害。 更换乙醚罐时不要吸烟。 应在通风良好的地方使用乙醚。

保存乙醚罐以使无关人员无法擅自动用。 只在规定的存放区域贮存乙醚罐。 不要将乙醚罐储存在阳光直接照射或温度高于 39 °C (102 °F)的地方。 将乙醚罐弃置在安全的地方。 不要刺破乙醚罐。 不要燃烧乙醚罐。

Caterpillar Information System:

3126E and 3126B Commercial and Truck Engines Mounting and Dismounting
P16, P20, P25, P28, P40 and P60 Pulverizer Walk-Around Inspection
P16, P20, P25, P28, P40 and P60 Pulverizer Principles of Breaking
3126E and 3126B Commercial and Truck Engines General Hazard Information
3208 Marine Engine Fuel System - Prime
3406E, C-10, C-12, C-15, C-16 Truck Engines Starting the Engine
P16, P20, P25, P28, P40 and P60 Pulverizer Operating Technique Information
Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines {1050, 1250, 1908, 1915} Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines {1050, 1250, 1908, 1915}
3208 Marine Engine Fuel System Water Separator - Drain
3208 Marine Engine Fuel Ratio Control - Inspect/Adjust
P16, P20, P25, P28, P40 and P60 Pulverizer Ring Gear - Lubricate
3208 Marine Engine Engine Oil Level - Check
Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907} Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907}
P16, P20, P25, P28, P40 and P60 Pulverizer Specifications
Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
3126E and 3126B Commercial and Truck Engines Overhaul Considerations
3126E and 3126B Commercial and Truck Engines Caterpillar Driver Information Display
3406E, C-10, C-12, C-15, C-16 Truck Engines Model View Illustrations
3208 Marine Engine Engine Air Cleaner Element (Foam) - Clean/Replace
3176C and 3196 Industrial Engines Turbocharger
3306C Truck Engine Engine Oil Pump - Remove
3126 Truck Engine (Military) Before Starting Engine
G3606 and G3608 Engines Engine Design
3208 Marine Engine Belt - Inspect/Adjust/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.