Operating Technique Information
Note: It is possible to mount the Pulverizer to the boom or to the stick. There are auxiliary lines kits that are available for the hydraulic system. You must become familiar with the controls of your machine. You must become familiar with the configuration of your machine.
CLOSE - In order to close the crushing jaws, move the control to the CLOSE position.
OPEN - In order to open the crushing jaws, move the control to the OPEN position.
SWIVEL RIGHT - In order to rotate the Pulverizer to the right, move the control to the ROTATE RIGHT position.
SWIVEL LEFT - In order to rotate the Pulverizer to the left, move the control to the ROTATE LEFT position.
Caterpillar Information System:
Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines {1050, 1250, 1908, 1915} Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines {1050, 1250, 1908, 1915}
3208 Marine Engine Fuel System Water Separator - Drain
3208 Marine Engine Fuel Ratio Control - Inspect/Adjust
P16, P20, P25, P28, P40 and P60 Pulverizer Ring Gear - Lubricate
3208 Marine Engine Engine Oil Level - Check
3208 Marine Engine Fuel System Secondary Filter - Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Description
P16, P20, P25, P28, P40 and P60 Pulverizer Plate Locations and Film Locations
3208 Marine Engine Governor Housing - Drain
P16, P20, P25, P28, P40 and P60 Pulverizer Bushing (Crushing Arm) - Lubricate
3306C Truck Engine Engine Oil Filter Base - Remove
3126 Truck Engine (Military) Commercial Heavy-Duty Coolant/Antifreeze and SCA
3406E, C-10, C-12, C-15, C-16 Truck Engines Starting the Engine
3208 Marine Engine Fuel System - Prime
3126E and 3126B Commercial and Truck Engines General Hazard Information
P16, P20, P25, P28, P40 and P60 Pulverizer Principles of Breaking
P16, P20, P25, P28, P40 and P60 Pulverizer Walk-Around Inspection
3126E and 3126B Commercial and Truck Engines Mounting and Dismounting
3126E and 3126B Commercial and Truck Engines Engine Starting
Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907} Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907}
P16, P20, P25, P28, P40 and P60 Pulverizer Specifications
Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
3126E and 3126B Commercial and Truck Engines Overhaul Considerations
3126E and 3126B Commercial and Truck Engines Caterpillar Driver Information Display