Specifications
Note: These specifications are based on the work tool without the mounting bracket.
Show/hide table
 | |
| Illustration 1 | g00485820 |
Show/hide table
| P16 Pulverizer | |
| Length (L) | 2450 mm (96.5 inch) |
| Width (W) | 1760 mm (69.3 inch) |
| Depth (D) | 926 mm (36.5 inch) |
| Jaw Opening (J) | 750 mm (29.5 inch) |
| Weight | 2100 kg (4650 lb) |
Show/hide table
| P20 Pulverizer | |
| Length (L) | 2370 mm (93.3 inch) |
| Width (W) | 1800 mm (70.1 inch) |
| Depth (D) | 926 mm (36.4 inch) |
| Jaw Opening (J) | 650 mm (25.5 inch) |
| Weight | 2400 kg (5280 lb) |
Show/hide table
| P25 Pulverizer | |
| Length (L) | 2730 mm (107.5 inch) |
| Width (W) | 1995 mm (78.5 inch) |
| Depth (D) | 1065 mm (41.9 inch) |
| Jaw Opening (J) | 900 mm (35.4 inch) |
| Weight | 3000 kg (6600 lb) |
Show/hide table
| P28 Pulverizer | |
| Length (L) | 2650 mm (104.3 inch) |
| Width (W) | 1995 mm (78.5 inch) |
| Depth (D) | 1065 mm (41.9 inch) |
| Jaw Opening (J) | 850 mm (33.5 inch) |
| Weight | 3600 kg (7920 lb) |
Show/hide table
| P40 Pulverizer | |
| Length (L) | 2970 mm (116.9 inch) |
| Width (W) | 2150 mm (84.7 inch) |
| Depth (D) | 1165 mm (45.9 inch) |
| Jaw Opening (J) | 1050 mm (41.3 inch) |
| Weight | 5500 kg (12100 lb) |
Show/hide table
| P60 Pulverizer | |
| Length (L) | 3265 mm (128.5 inch) |
| Width (W) | 2265 mm (89.1 inch) |
| Depth (D) | 1355 mm (53.3 inch) |
| Jaw Opening (J) | 1150 mm (45.3 inch) |
| Weight | 8100 kg (17820 lb) |
Caterpillar Information System:
Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907} Installation Of The 129-6628 Speed/Timing Sensor On 3406E Engines{1907}
3126E and 3126B Commercial and Truck Engines Engine Starting
3126E and 3126B Commercial and Truck Engines Mounting and Dismounting
P16, P20, P25, P28, P40 and P60 Pulverizer Walk-Around Inspection
P16, P20, P25, P28, P40 and P60 Pulverizer Principles of Breaking
3126E and 3126B Commercial and Truck Engines General Hazard Information
3208 Marine Engine Fuel System - Prime
3406E, C-10, C-12, C-15, C-16 Truck Engines Starting the Engine
P16, P20, P25, P28, P40 and P60 Pulverizer Operating Technique Information
Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines {1050, 1250, 1908, 1915} Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines {1050, 1250, 1908, 1915}
3208 Marine Engine Fuel System Water Separator - Drain
3208 Marine Engine Fuel Ratio Control - Inspect/Adjust
Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
3126E and 3126B Commercial and Truck Engines Overhaul Considerations
3126E and 3126B Commercial and Truck Engines Caterpillar Driver Information Display
3406E, C-10, C-12, C-15, C-16 Truck Engines Model View Illustrations
3208 Marine Engine Engine Air Cleaner Element (Foam) - Clean/Replace
3176C and 3196 Industrial Engines Turbocharger
3306C Truck Engine Engine Oil Pump - Remove
3126 Truck Engine (Military) Before Starting Engine
G3606 and G3608 Engines Engine Design
3208 Marine Engine Belt - Inspect/Adjust/Replace
Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466} Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466}
3126 HEUI Industrial Engine Troubleshooting