Bushing (Crushing Arm) - Lubricate
Note: Wipe all fittings before lubricating.
Show/hide table
Illustration 1 | g00519861 |
- Lubricate the fitting (1). There are two fittings. There is one fitting on each side of the attachment.
Refer to the Operation and Maintenance Manual, "Lubricant Specifications".
Caterpillar Information System:
3306C Truck Engine Engine Oil Filter Base - Remove
3126 Truck Engine (Military) Commercial Heavy-Duty Coolant/Antifreeze and SCA
3600 Distillate Fuel Engines Refill Capacities
3126E and 3126B Commercial and Truck Engines Cooling System Supplemental Coolant Additive (SCA) - Test/Add
3208 Marine Engine Oil Fumes Filter - Replace
3126 Truck Engine (Military) Coolant Recommendations
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
P16, P20, P25, P28, P40 and P60 Pulverizer Safety Messages
3208 Marine Engine Sea Water Strainer - Clean/Inspect
C-18 Truck Engines Reference Material
Air Conditioning and Heating R134a for All Caterpillar Machines Manifold Gauge Set (Refrigerant) - Remove
3208 Marine Engine Governor Housing - Drain
P16, P20, P25, P28, P40 and P60 Pulverizer Plate Locations and Film Locations
3406E, C-10, C-12, C-15, C-16 Truck Engines Engine Description
3208 Marine Engine Fuel System Secondary Filter - Replace
3208 Marine Engine Engine Oil Level - Check
P16, P20, P25, P28, P40 and P60 Pulverizer Ring Gear - Lubricate
3208 Marine Engine Fuel Ratio Control - Inspect/Adjust
3208 Marine Engine Fuel System Water Separator - Drain
Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines {1050, 1250, 1908, 1915} Installation Of The Hydraulic Actuator System (Hydrax System) on G3606 and G3608 Engines {1050, 1250, 1908, 1915}
P16, P20, P25, P28, P40 and P60 Pulverizer Operating Technique Information
3406E, C-10, C-12, C-15, C-16 Truck Engines Starting the Engine
3208 Marine Engine Fuel System - Prime