Cylinder Liner - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件名称 | 数量 |
| A | 8T-0812 | 缸套拉拔器 | 1 |
| 1U-6317 | 电桥 | 1 | |
| 1U-6319 | 套筒 | 1 | |
开始:
- 拆卸间隔板。 请参考解体与组装, "间隔板 - 拆卸和安装"。
- 拆卸发动机机油泵。 请参考解体与组装, "发动机机油泵 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 转动曲轴，直到两个活塞处于下止点。 从每根杆上拆下两个连杆盖螺栓 (2) 。 拆卸连杆盖 (4) 。
Show/hide table
 | |
| 图 1 | g00474523 |
- 用一般软锤将连杆 (3) 轻轻敲离曲轴。 拆下轴瓦 (1) 。
- 使用工具 (A) 拆下缸套 (5) 。
Show/hide table
 | |
| 图 2 | g00474623 |
- 从缸套上拆下活塞和连杆。
Caterpillar Information System:
3126 HEUI Industrial Engine Troubleshooting
Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466} Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466}
3208 Marine Engine Belt - Inspect/Adjust/Replace
G3606 and G3608 Engines Engine Design
3126 Truck Engine (Military) Before Starting Engine
3306C Truck Engine Engine Oil Pump - Remove
3176C and 3196 Industrial Engines Turbocharger
3208 Marine Engine Engine Air Cleaner Element (Foam) - Clean/Replace
3406E, C-10, C-12, C-15, C-16 Truck Engines Model View Illustrations
3126E and 3126B Commercial and Truck Engines Caterpillar Driver Information Display
3126E and 3126B Commercial and Truck Engines Overhaul Considerations
Instructions for the Service Replacement of the Turbochargers{1052} Instructions for the Service Replacement of the Turbochargers{1052}
3208 Marine Engine Engine Air Cleaner Element - Clean/Replace
G3612 and G3616 Engines Magneto
C-10 and C-12 Truck Engines Camshaft
P16, P20, P25, P28, P40 and P60 Pulverizer Crusher Tooth - Rebuild
P16, P20, P25, P28, P40 and P60 Pulverizer Crusher Tooth - Replace
G3606 and G3608 Engines Magneto Drive
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install
Removal Of Broken Head Bolts On 3176 Engines Without Removing The Aluminum Spacer Deck{1100} Removal Of Broken Head Bolts On 3176 Engines Without Removing The Aluminum Spacer Deck{1100}
3208 Marine Engine Aftercooler Drain Plug - Inspect
G3500 Engines Vibration Damper Guard
3406E Truck Engines Fuel Transfer Pump
G3612 and G3616 Engines Magneto Drive