3208 Marine Engine Caterpillar


Aftercooler Drain Plug - Inspect

Usage:

3208 01Z



Illustration 1g00466348

Typical location of aftercooler drain

Inspect the plug for the aftercooler drain (if equipped). Ensure that the plug is one of the following plugs:


NOTICE

A failed aftercooler drain plug can cause the engine compartment to fill with sea water. Any plugs used in the aftercooler drain port, other than those recommended above, may corrode. Use only those recommended plugs.


Caterpillar Information System:

Removal Of Broken Head Bolts On 3176 Engines Without Removing The Aluminum Spacer Deck{1100} Removal Of Broken Head Bolts On 3176 Engines Without Removing The Aluminum Spacer Deck{1100}
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Nozzles - Install
G3606 and G3608 Engines Magneto Drive
P16, P20, P25, P28, P40 and P60 Pulverizer Crusher Tooth - Replace
P16, P20, P25, P28, P40 and P60 Pulverizer Crusher Tooth - Rebuild
C-10 and C-12 Truck Engines Camshaft
G3612 and G3616 Engines Magneto
3208 Marine Engine Engine Air Cleaner Element - Clean/Replace
3304B and 3306B Engines for Caterpillar Built Machines Cylinder Liner - Remove
3126 HEUI Industrial Engine Troubleshooting
Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466} Installation Of The 161-7153 Harness Assembly On The 3126B Truck Engine{1408, 4466}
3208 Marine Engine Belt - Inspect/Adjust/Replace
G3500 Engines Vibration Damper Guard
3406E Truck Engines Fuel Transfer Pump
G3612 and G3616 Engines Magneto Drive
P16, P20, P25, P28, P40 and P60 Pulverizer Bearings (Cylinder Ends) - Lubricate
3406C Engines for Caterpillar Built Machines Turbocharger
C18 Marine and Marine Generator Set Engines Camshaft
3608 Engine Engine Oil Pump
G3612 and G3616 Engines Engine Oil Pump
3208 Marine Engine Fuel System Primary Filter/Water Separator Element - Replace
3606 and 3608 Engines Inlet Valve Lubrication Metering Pump
G3612 and G3616 Engines Inlet Valve Lubrication Metering Pump
3208 Marine Engine PCV Valve - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.