Water Injection System Pump - Check - If Equipped
Show/hide table
 |
|
Горещото масло и горещите детайли могат да предизвикат трудови злополуки. Не позволявайте горещо масло или детайли да влязат в допир с кожата. |
Show/hide table
| |
| Илюстрация 1 | g06251111 |
Бележка Вижте Ръководството за експлоатация и техническо обслужване, "Информация за опасности от общ характер" за информация по събирането на разлети работни течности.
- Стартирайте машината.
- Задействайте помпата за впръскване на вода.
- Огледайте отвора. Ако се наблюдава наличие на въздух, вода или масло, то може да се наложи уплътнението да се регулира или подмени.
Бележка Изхвърляйте източените течности според местните разпоредби.
Caterpillar Information System:
Retrofitting Hydraulic Hose Clamping On D2 Series Loaders {5057} Retrofitting Hydraulic Hose Clamping On D2 Series Loaders {5057}
Procedures are Now Available to Rework Soot Sensor, Single Stage Precleaner, and Dual Stage Precleaner on Certain 815K Soil Compactors and 816K Landfill Compactors {1051, 1054, 1055, 108F, 108K, 1335, 1400, 1408} Procedures are Now Available to Rework Soot Sensor, Single Stage Precleaner, and Dual Stage Precleaner on Certain 815K Soil Compactors and 816K Landfill Compactors {1051, 1054, 1055, 108F, 108K, 1335, 1400, 1408}
MD6200 Rotary Drill Engine and Machine Warm-Up
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
Brake Pedal Stop Bolt May Become Loose on Certain F2-Series Backhoe Loaders {4251} Brake Pedal Stop Bolt May Become Loose on Certain F2-Series Backhoe Loaders {4251}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
Release Notes for Cat® Product Link Back-Office 2017E.3 {7606} Release Notes for Cat® Product Link Back-Office 2017E.3 {7606}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Propel Lines
Certain Cat® Product Link Devices (PL241) in China May Fail to Update to New Firmware {7606} Certain Cat® Product Link Devices (PL241) in China May Fail to Update to New Firmware {7606}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Hydraulic Tank
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Pressure Sensor (Primary Steering)
Certain Cat® Product Link Assets are Unable to Enable/Disable Through VisionLink {7606} Certain Cat® Product Link Assets are Unable to Enable/Disable Through VisionLink {7606}
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Gear and Bearing - Remove and Install
CB13, CB15 and CB16 Asphalt Compactor Propel Systems Relief Valve (Charge) - Test and Adjust
CB13, CB15 and CB16 Asphalt Compactor Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks {1071} Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks {1071}
A Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks is Available {1071} A Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks is Available {1071}
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System CAN Data Link - Test
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System Speed Sensor (Dual Signal) - Test
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System Speed Sensor - Test
New High Strength Bolts Now Used on the Spindle to Brake Housing Joint and the Brake Housing to Brake Anchor Joint on R2900, R2900G, and R3000H Load Haul Dump Machines {4001, 4251} New High Strength Bolts Now Used on the Spindle to Brake Housing Joint and the Brake Housing to Brake Anchor Joint on R2900, R2900G, and R3000H Load Haul Dump Machines {4001, 4251}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Swing Cylinder Lines
Cat® Product Link Elite (PLE601) Network Managers are Not Communicating with Allen Bradley Panels After Firmware Update {0115, 449C} Cat® Product Link Elite (PLE601) Network Managers are Not Communicating with Allen Bradley Panels After Firmware Update {0115, 449C}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module