PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Caterpillar


Water Spray Lines

Usage:

PM825 3C6


Illustration 1g06250757

Table 1
Item  Qty  Part  Specification Description 
9X-2480 Bolt  Torque to 5 ± 1 N·m (44 ± 9 lb in)
8T-4971 Bolt  Torque to 5 ± 1 N·m (44 ± 9 lb in)

Caterpillar Information System:

Brake Pedal Stop Bolt May Become Loose on Certain F2-Series Backhoe Loaders {4251} Brake Pedal Stop Bolt May Become Loose on Certain F2-Series Backhoe Loaders {4251}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
Release Notes for Cat® Product Link Back-Office 2017E.3 {7606} Release Notes for Cat® Product Link Back-Office 2017E.3 {7606}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Propel Lines
Certain Cat® Product Link Devices (PL241) in China May Fail to Update to New Firmware {7606} Certain Cat® Product Link Devices (PL241) in China May Fail to Update to New Firmware {7606}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Hydraulic Tank
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Pressure Sensor (Primary Steering)
Certain Cat® Product Link Assets are Unable to Enable/Disable Through VisionLink {7606} Certain Cat® Product Link Assets are Unable to Enable/Disable Through VisionLink {7606}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Inertial Sensor (Acceleration, Angle)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Inertial Sensor (Acceleration, Angle)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Speed Sensor (Main Fan)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Pressure Sensor (Lift Cylinder Rod End Oil)
MD6200 Rotary Drill Engine and Machine Warm-Up
Procedures are Now Available to Rework Soot Sensor, Single Stage Precleaner, and Dual Stage Precleaner on Certain 815K Soil Compactors and 816K Landfill Compactors {1051, 1054, 1055, 108F, 108K, 1335, 1400, 1408} Procedures are Now Available to Rework Soot Sensor, Single Stage Precleaner, and Dual Stage Precleaner on Certain 815K Soil Compactors and 816K Landfill Compactors {1051, 1054, 1055, 108F, 108K, 1335, 1400, 1408}
Retrofitting Hydraulic Hose Clamping On D2 Series Loaders {5057} Retrofitting Hydraulic Hose Clamping On D2 Series Loaders {5057}
MD6200 Rotary Drill Water Injection System Pump - Check - If Equipped
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Gear and Bearing - Remove and Install
CB13, CB15 and CB16 Asphalt Compactor Propel Systems Relief Valve (Charge) - Test and Adjust
CB13, CB15 and CB16 Asphalt Compactor Machine Systems Relief Valve (Main, Vibratory) - Test and Adjust
Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks {1071} Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks {1071}
A Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks is Available {1071} A Procedure to Improve the ATAAC Tubes on Certain 797 and 797B Off-Highway Trucks is Available {1071}
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System CAN Data Link - Test
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System Speed Sensor (Dual Signal) - Test
CS54B, CP54B and CS64B Vibratory Soil Compactors Machine Electronic Control System Speed Sensor - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.