R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Caterpillar


Pressure Sensor (Primary Steering)

Usage:

R1700K KT4


Illustration 1g06046002
Pressure Sensor and Pin Locations

Table 1
Specification for 344-7391 Pressure Sensor (PRIMARY STEERING) 
Item  Qty  Part  Specification Description 
344-7391 Pressure Sensor  Final installation torque is 65 ± 10 N·m (48 ± 7 lb ft)
Voltage range is 7 VDC to 14 VDC.
Output type is PWM.
Output frequency is 500 ± 100 Hz.
Duty cycle is 10% to 90%.

Caterpillar Information System:

Certain Cat® Product Link Assets are Unable to Enable/Disable Through VisionLink {7606} Certain Cat® Product Link Assets are Unable to Enable/Disable Through VisionLink {7606}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Inertial Sensor (Acceleration, Angle)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Inertial Sensor (Acceleration, Angle)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Speed Sensor (Main Fan)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Pressure Sensor (Lift Cylinder Rod End Oil)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Pressure Sensor (Tilt Cylinder Rod End Oil)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Pressure Sensor (Tilt Cylinder Head End Oil)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Pressure Sensor (Brake Accumulator)
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic and Machine Systems Pressure Sensor (Pilot Oil)
R3000H Load Haul Dump Braking System Service Brake System Pressure - Test
CB13, CB15 and CB16 Asphalt Compactor Propel Systems Hydraulic Oil Contamination - Test
New Tandem Drive Chains are Now Used on Certain 14L Motorgraders {3261, 4063} New Tandem Drive Chains are Now Used on Certain 14L Motorgraders {3261, 4063}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Hydraulic Tank
Certain Cat® Product Link Devices (PL241) in China May Fail to Update to New Firmware {7606} Certain Cat® Product Link Devices (PL241) in China May Fail to Update to New Firmware {7606}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Propel Lines
Release Notes for Cat® Product Link Back-Office 2017E.3 {7606} Release Notes for Cat® Product Link Back-Office 2017E.3 {7606}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
Brake Pedal Stop Bolt May Become Loose on Certain F2-Series Backhoe Loaders {4251} Brake Pedal Stop Bolt May Become Loose on Certain F2-Series Backhoe Loaders {4251}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
MD6200 Rotary Drill Engine and Machine Warm-Up
Procedures are Now Available to Rework Soot Sensor, Single Stage Precleaner, and Dual Stage Precleaner on Certain 815K Soil Compactors and 816K Landfill Compactors {1051, 1054, 1055, 108F, 108K, 1335, 1400, 1408} Procedures are Now Available to Rework Soot Sensor, Single Stage Precleaner, and Dual Stage Precleaner on Certain 815K Soil Compactors and 816K Landfill Compactors {1051, 1054, 1055, 108F, 108K, 1335, 1400, 1408}
Retrofitting Hydraulic Hose Clamping On D2 Series Loaders {5057} Retrofitting Hydraulic Hose Clamping On D2 Series Loaders {5057}
MD6200 Rotary Drill Water Injection System Pump - Check - If Equipped
MP318, MP324, MP332, MP345 and and MP365 Multi-Processors and Jaws Gear and Bearing - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.