C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Electronic Control Wiring Group

Usage:

826K 2L3


图 1g06144908
左视图

表 1
技术规格,适用于 443-7733 电子控制导线总成 
项目  数量  零件  技术规格说明 
0S-2353 螺栓  拧紧至扭矩为 115 ± 20 N·m (85 ± 15 lb ft)。 
拧紧螺栓至扭矩为 7.0 ± 0.5 N·m (61.9 ± 4.4 lb in)。 

Caterpillar Information System:

New Position Sensor Is Now Used on Certain Cat® Products {5645, 7220} New Position Sensor Is Now Used on Certain Cat® Products {5645, 7220}
AP600F and AP655F Asphalt Pavers Engine Supplement Gear Motor (Fan Drive) - Assemble
AP600F and AP655F Asphalt Pavers Engine Supplement Gear Motor (Fan Drive) - Disassemble
C175-20 High Altitude Engine for Caterpillar Built Machines Turbocharger - Remove - Eight Turbocharger Configuration - High Pressure
745 & 740 GC Articulated Truck Gear Pump - Air to Air After Cooler (ATAAC) Fan System
C175-20 High Altitude Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install - Eight Turbocharger Configuration
HFW222 SC Felling Head Bearing for Grapple Arm - Lubricate
745 & 740 GC Articulated Truck Gear Motor (Hydraulic Fan)
New Engine Software for Certain C4.4 Machine Engines {1920} New Engine Software for Certain C4.4 Machine Engines {1920}
HFW222 SC Felling Head Bearing for Accumulator Arm - Lubricate
A New Suspension Gland and Backup Ring are Now Available on Certain 795F and 797 Off-Highway Trucks {7200, 7201} A New Suspension Gland and Backup Ring are Now Available on Certain 795F and 797 Off-Highway Trucks {7200, 7201}
740 Ejector Articulated Truck Piston Pump (Hydraulic Fan)
Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {1408, 7338, 7490, 7602, 7606} Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {1408, 7338, 7490, 7602, 7606}
Installation of the 522-3935 SATCO Standby Kit on the 538 GF Forest Machine {5069, 5117} Installation of the 522-3935 SATCO Standby Kit on the 538 GF Forest Machine {5069, 5117}
HFW222 SC Felling Head Disc Saw Tooth - Inspect/Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Service Brake Discs - Check
Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {7606, 7620} Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {7606, 7620}
PM-620 and PM-622 Cold Planer Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
A New Plate is Now Used in the Mud Guard Group on Certain 770G and 772G Off-Highway Trucks {4220, 7150, 7252} A New Plate is Now Used in the Mud Guard Group on Certain 770G and 772G Off-Highway Trucks {4220, 7150, 7252}
Protection Plates for the Torque Converter Sound Suppression are Now Used on Certain 770G Off-Highway Trucks {3105} Protection Plates for the Torque Converter Sound Suppression are Now Used on Certain 770G Off-Highway Trucks {3105}
New Protection Plates for the Torque Converter Sound Suppression are Now Used On Certain 772G Off-Highway Trucks {3105} New Protection Plates for the Torque Converter Sound Suppression are Now Used On Certain 772G Off-Highway Trucks {3105}
HFW222 SC Felling Head Bearing for Output Shaft - Lubricate
The Power Train Oil Lines Group has Been Improved on 772G Off-Highway Trucks {3016, 3154} The Power Train Oil Lines Group has Been Improved on 772G Off-Highway Trucks {3016, 3154}
HFW222 SC Felling Head Disc Saw - Clean/Inspect/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.