Exhaust Elbow - Remove and Install - Eight Turbocharger Configuration
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctite Copper Anti-Seize | - |
- Remove bolts (2), and support (2).
Show/hide table
Illustration 2 g06144646 - Attach a suitable lifting device to exhaust elbow (5). The weight of exhaust elbow (5) is approximately
59 kg (130 lb) . - Remove clamps (3), bolts (4), and bolts (6).
- Remove exhaust elbow (5).
Show/hide table
Illustration 3 g06144653 - Attach a suitable lifting device exhaust elbow (9). The weight of exhaust elbow (5) is approximately
59 kg (130 lb) . - Remove clamps (7), bolts (8), and bolts (10).
Note: Do not re use clamps (7).
- Remove exhaust elbow (9).
Note: Clamps (3), clamps (7), and the bellows between the exhaust elbows and the high-pressure turbochargers are one time use only. Discard when removed.
Show/hide table
Illustration 1 | g06144641 |
- Install exhaust elbow (5), and exhaust elbow (9) in the reverse order of removal.
- Apply Tooling (A) to the threads and bearing surfaces of bolts (6)
- Apply Tooling (A) to the threads of clamps (7).
- Tighten clamps (7) to a torque of
17 ± 2 N·m (13 ± 2 lb ft) .
Caterpillar Information System:
HFW222 SC Felling Head Bearing for Grapple Arm - Lubricate
745 & 740 GC Articulated Truck Gear Motor (Hydraulic Fan)
New Engine Software for Certain C4.4 Machine Engines {1920} New Engine Software for Certain C4.4 Machine Engines {1920}
HFW222 SC Felling Head Bearing for Accumulator Arm - Lubricate
A New Suspension Gland and Backup Ring are Now Available on Certain 795F and 797 Off-Highway Trucks {7200, 7201} A New Suspension Gland and Backup Ring are Now Available on Certain 795F and 797 Off-Highway Trucks {7200, 7201}
740 Ejector Articulated Truck Piston Pump (Hydraulic Fan)
HFW222 SC Felling Head Operating Technique Information
C7.1 Engines and Generator Sets ARD Nozzle Heater - Test
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines Turbocharger
C15 and C18 Engines for Caterpillar Built Machines Water Lines
R1600H Load Haul Dump Machine Systems Gear Pump (Implement, Steering, Pilot and Braking) - Assemble
745 & 740 GC Articulated Truck Gear Pump - Air to Air After Cooler (ATAAC) Fan System
C175-20 High Altitude Engine for Caterpillar Built Machines Turbocharger - Remove - Eight Turbocharger Configuration - High Pressure
AP600F and AP655F Asphalt Pavers Engine Supplement Gear Motor (Fan Drive) - Disassemble
AP600F and AP655F Asphalt Pavers Engine Supplement Gear Motor (Fan Drive) - Assemble
New Position Sensor Is Now Used on Certain Cat® Products {5645, 7220} New Position Sensor Is Now Used on Certain Cat® Products {5645, 7220}
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Wiring Group
Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {1408, 7338, 7490, 7602, 7606} Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {1408, 7338, 7490, 7602, 7606}
Installation of the 522-3935 SATCO Standby Kit on the 538 GF Forest Machine {5069, 5117} Installation of the 522-3935 SATCO Standby Kit on the 538 GF Forest Machine {5069, 5117}
HFW222 SC Felling Head Disc Saw Tooth - Inspect/Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Service Brake Discs - Check
Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {7606, 7620} Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {7606, 7620}
PM-620 and PM-622 Cold Planer Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install