Gear Motor (Fan Drive) - Assemble
- Use a suitable press to install bearing (24) onto shaft (15). Install retaining ring (23).
Show/hide table
Illustration 3 g06148576 - Use Tooling (C) to install lip seal (22) into adapter plate (18). Install retaining ring (21) into adapter plate (18).
Show/hide table
Illustration 4 g06149047 - Install seal (20) into adapter plate (18).
Show/hide table
Illustration 5 g06148574 - Install seal (19) into intermediate plate (17).
Show/hide table
Illustration 6 g06149050 - Use a suitable press to install shaft assembly (15) into adapter plate (17).
Show/hide table
Illustration 7 g06148544 - Install intermediate plate (17) and shaft assembly (15) onto adapter plate (18).
Show/hide table
Illustration 8 g06148543 - Install keyway (16) into shaft assembly (15).
Show/hide table
Illustration 9 g06148541 - Install shaft (14).
Show/hide table
Illustration 10 g06148539 - Install back up ring (13) and seal (12) into bearing housing (11).
Show/hide table
Illustration 11 g06148538 Note: Backup ring (13) and seal (12) face away from gears (10) and (9).
- Install bearing housing (11).
Show/hide table
Illustration 12 g06148537 - Install gears (10) and (9).
Show/hide table
Illustration 13 g06147874 - Install O-ring seal (8) into housing (7).
Show/hide table
Illustration 14 g06147868 - Install housing (7).
Show/hide table
Illustration 15 g06147864 - Install back up ring (6) and seal (5) into bearing housing (4).
Show/hide table
Illustration 16 g06147860 Note: Backup ring (6) and seal (5) face away from gears (10) and (9).
- Install bearing housing (4) and O-ring seal (3).
Show/hide table
Illustration 17 g06147851 - Install cover (2) and bolts (1). Remove from Tooling (A).
Show/hide table
Illustration 1 | g06148579 |
Show/hide table
Illustration 2 | g06148578 |
End By:
- Install the hydraulic fan gear motor.
Caterpillar Information System:
AP600F and AP655F Asphalt Pavers Engine Supplement Gear Motor (Fan Drive) - Disassemble
C175-20 High Altitude Engine for Caterpillar Built Machines Turbocharger - Remove - Eight Turbocharger Configuration - High Pressure
745 & 740 GC Articulated Truck Gear Pump - Air to Air After Cooler (ATAAC) Fan System
C175-20 High Altitude Engine for Caterpillar Built Machines Exhaust Elbow - Remove and Install - Eight Turbocharger Configuration
HFW222 SC Felling Head Bearing for Grapple Arm - Lubricate
745 & 740 GC Articulated Truck Gear Motor (Hydraulic Fan)
New Engine Software for Certain C4.4 Machine Engines {1920} New Engine Software for Certain C4.4 Machine Engines {1920}
HFW222 SC Felling Head Bearing for Accumulator Arm - Lubricate
A New Suspension Gland and Backup Ring are Now Available on Certain 795F and 797 Off-Highway Trucks {7200, 7201} A New Suspension Gland and Backup Ring are Now Available on Certain 795F and 797 Off-Highway Trucks {7200, 7201}
740 Ejector Articulated Truck Piston Pump (Hydraulic Fan)
HFW222 SC Felling Head Operating Technique Information
C7.1 Engines and Generator Sets ARD Nozzle Heater - Test
New Position Sensor Is Now Used on Certain Cat® Products {5645, 7220} New Position Sensor Is Now Used on Certain Cat® Products {5645, 7220}
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Wiring Group
Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {1408, 7338, 7490, 7602, 7606} Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {1408, 7338, 7490, 7602, 7606}
Installation of the 522-3935 SATCO Standby Kit on the 538 GF Forest Machine {5069, 5117} Installation of the 522-3935 SATCO Standby Kit on the 538 GF Forest Machine {5069, 5117}
HFW222 SC Felling Head Disc Saw Tooth - Inspect/Replace
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Service Brake Discs - Check
Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {7606, 7620} Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {7606, 7620}
PM-620 and PM-622 Cold Planer Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
A New Plate is Now Used in the Mud Guard Group on Certain 770G and 772G Off-Highway Trucks {4220, 7150, 7252} A New Plate is Now Used in the Mud Guard Group on Certain 770G and 772G Off-Highway Trucks {4220, 7150, 7252}
Protection Plates for the Torque Converter Sound Suppression are Now Used on Certain 770G Off-Highway Trucks {3105} Protection Plates for the Torque Converter Sound Suppression are Now Used on Certain 770G Off-Highway Trucks {3105}
New Protection Plates for the Torque Converter Sound Suppression are Now Used On Certain 772G Off-Highway Trucks {3105} New Protection Plates for the Torque Converter Sound Suppression are Now Used On Certain 772G Off-Highway Trucks {3105}
HFW222 SC Felling Head Bearing for Output Shaft - Lubricate