A New Plate is Now Used in the Mud Guard Group on Certain 770G and 772G Off-Highway Trucks {4220, 7150, 7252}
- Off-Highway Truck/Tractor
- 770G (S/N: RMA1-101; TWA1-155; KDH1-366; ECM1-383; ECX1-114)
- 772G (S/N: LTS1-459; KEX1-258; LTX1-210)
Description Of Change: New plate is now used in the mud guard group on the machines listed above. The new plate will allow an improved amount of deflection of the mud flap material and increase the service life of the mud flap.
Adaptable To:
Show/hide table
| |
| Illustration 1 | g06145230 |
Show/hide table
| Part List | ||||
| Item | Qty | New Part Number | Part Name | Former Part Number |
| 1 | 4 | Plate | ||
New plate (1) is available to the machines listed within the serial numbers, and is effective with all machines after the listed serial numbers.
Use the following rework procedure to install new plate (1) in the mud guard group.
- Remove and discard the former 349-1260 Plate As (A) from the mud guard group. Retain the hardware.
Show/hide table
Illustration 3 g06145233 Show/hide table
Illustration 4 g06145234 View of Area B - Install four new 493-3448 Plates (1) on the mud guard group using hardware that was retained in Step 1.
Show/hide table
| |
| Illustration 2 | g06145232 |
Caterpillar Information System:
PM-620 and PM-622 Cold Planer Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {7606, 7620} Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {7606, 7620}
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Service Brake Discs - Check
HFW222 SC Felling Head Disc Saw Tooth - Inspect/Replace
Installation of the 522-3935 SATCO Standby Kit on the 538 GF Forest Machine {5069, 5117} Installation of the 522-3935 SATCO Standby Kit on the 538 GF Forest Machine {5069, 5117}
Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {1408, 7338, 7490, 7602, 7606} Installation Procedure for the Product Link® PL641 on Certain Caterpillar Telehandlers {1408, 7338, 7490, 7602, 7606}
C15 and C18 Engines for Caterpillar Built Machines Electronic Control Wiring Group
New Position Sensor Is Now Used on Certain Cat® Products {5645, 7220} New Position Sensor Is Now Used on Certain Cat® Products {5645, 7220}
AP600F and AP655F Asphalt Pavers Engine Supplement Gear Motor (Fan Drive) - Assemble
AP600F and AP655F Asphalt Pavers Engine Supplement Gear Motor (Fan Drive) - Disassemble
C175-20 High Altitude Engine for Caterpillar Built Machines Turbocharger - Remove - Eight Turbocharger Configuration - High Pressure
745 & 740 GC Articulated Truck Gear Pump - Air to Air After Cooler (ATAAC) Fan System
Protection Plates for the Torque Converter Sound Suppression are Now Used on Certain 770G Off-Highway Trucks {3105} Protection Plates for the Torque Converter Sound Suppression are Now Used on Certain 770G Off-Highway Trucks {3105}
New Protection Plates for the Torque Converter Sound Suppression are Now Used On Certain 772G Off-Highway Trucks {3105} New Protection Plates for the Torque Converter Sound Suppression are Now Used On Certain 772G Off-Highway Trucks {3105}
HFW222 SC Felling Head Bearing for Output Shaft - Lubricate
The Power Train Oil Lines Group has Been Improved on 772G Off-Highway Trucks {3016, 3154} The Power Train Oil Lines Group has Been Improved on 772G Off-Highway Trucks {3016, 3154}
HFW222 SC Felling Head Disc Saw - Clean/Inspect/Replace
735C and 745C Articulated Trucks Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
HFW222 SC Felling Head Piston Motor (Disc Saw) Area - Clean
A New Special Instruction for the Rework Procedure for the Tether Hitch Group Is Now Available on Certain 552 Track Feller Bunchers {7100} A New Special Instruction for the Rework Procedure for the Tether Hitch Group Is Now Available on Certain 552 Track Feller Bunchers {7100}
Rework Procedure for the Tether Hitch Group on Certain 552 Track Feller Bunchers {7100} Rework Procedure for the Tether Hitch Group on Certain 552 Track Feller Bunchers {7100}
740C EJECTOR Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped
A New Track Roller Group Is Now Used on Certain 521B Track Feller Bunchers {4180} A New Track Roller Group Is Now Used on Certain 521B Track Feller Bunchers {4180}
725C2 Articulated Truck Automatic Lubrication Filler Filter - Clean - Autolube - If Equipped