Hood - Remove and Install - One Piece Hood
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 439-3940 | Bracket As | 3 |
Start By:
- Remove hood tilt actuator
- Remove bolts (1). Remove panel (2).
Show/hide table
Illustration 2 g06028150 - Disconnect wire harnesses (3).
Show/hide table
Illustration 3 g06028153 - Remove grommet (4). Reposition wire harnesses (3) through hole (X)
Show/hide table
Illustration 4 g06028156 - Remove air cleaner cover (5).
Show/hide table
Illustration 5 g06028158 Show/hide table
Illustration 6 g06028161 - Remove plugs (6).
Show/hide table
Illustration 7 g06028162 - Attach Tooling (A) and a suitable lifting device to hood (7). The weight of hood (7) is approximately
295 kg (650 lb) .Show/hide table
Illustration 8 g06028164 - Remove pins (8). Remove hood (7).
Show/hide table
| |
| Illustration 1 | g06028149 |
- Install hood (7) in the reverse order of removal.
Caterpillar Information System:
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Engine - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Pump Drive - Remove and Install
New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104} New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Gear Motor (Hydraulic Fan) - Remove and Install
Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091} Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091}
Load Haul Dump Power Train Output Transfer Gears - Assemble
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
994K Large Wheel Loader Field Assembly Manual Position Sensor (Lift, Tilt) - Install
Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380} Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Electric Starting Motor - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Alternator - Remove and Install
2570D, 2670D Wheel Feller Buncher Operator Controls
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install - Smart Actuator
Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050} Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050}
Installing the 486-3284 Air Conditioner Breather Kit {7320} Installing the 486-3284 Air Conditioner Breather Kit {7320}
Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073} Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073}
Command for Underground Sensor (Light Curtain) - Configure
Command for Underground Sensor (Light Curtain) - Adjust
725C2 Articulated Truck Safety Messages
725C2 Articulated Truck Engine Stopping
725C2 Articulated Truck Parking
725C2 Articulated Truck Specifications
725C2 Articulated Truck Operator Controls
725C2 Articulated Truck Monitoring System