Alternator - Remove and Install
Start By:
- Remove the engine enclosure.
Show/hide table
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
- Turn the disconnect switch to the OFF position.
Show/hide table
Illustration 1 g02874903 - Remove belt (2) from alternator (1).
Show/hide table
Illustration 2 g06038648 Note: Picture for reference only.
- Disconnect harness assemblies (3) and ground cable (4).
- Remove bolts (4) and alternator (1).
- Install alternator (1) in the reverse order of removal.
Caterpillar Information System:
2570D, 2670D Wheel Feller Buncher Operator Controls
Sound Testing Procedure for the 795F AC XQ Off-Highway Truck {0116, 1000, 1801, 1806, 7000, 7076, 7261, 7329} Sound Testing Procedure for the 795F AC XQ Off-Highway Truck {0116, 1000, 1801, 1806, 7000, 7076, 7261, 7329}
New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269} New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269}
A New Refrigerant Compressor Group Is Now Used On Certain Large Off-Highway Trucks {1802} A New Refrigerant Compressor Group Is Now Used On Certain Large Off-Highway Trucks {1802}
Improved Hoses Are Now Used on Certain Backhoe Loaders {5057} Improved Hoses Are Now Used on Certain Backhoe Loaders {5057}
994K Large Wheel Loader Field Assembly Manual Tilt Cylinder - Install
Serviceability of Front Axle May Require Frame Change for Certain Multi-Terrain Loaders {3268, 3278} Serviceability of Front Axle May Require Frame Change for Certain Multi-Terrain Loaders {3268, 3278}
A New Handle Assembly is Used on Certain D Series Skid Steer Loaders, Compact Track Loaders, and Multi-Terrain Loaders {7308} A New Handle Assembly is Used on Certain D Series Skid Steer Loaders, Compact Track Loaders, and Multi-Terrain Loaders {7308}
Implement Hoses May Rub and Wear on Swing Casting for Certain Backhoe Loaders {5057} Implement Hoses May Rub and Wear on Swing Casting for Certain Backhoe Loaders {5057}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Battery - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Engine Enclosure (Hood) - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Hood Tilt Actuator - Remove and Install - Smart Actuator
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Electric Starting Motor - Remove and Install
Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380} Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380}
994K Large Wheel Loader Field Assembly Manual Position Sensor (Lift, Tilt) - Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
Load Haul Dump Power Train Output Transfer Gears - Assemble
Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091} Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Gear Motor (Hydraulic Fan) - Remove and Install
New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104} New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Pump Drive - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Engine - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood - Remove and Install - One Piece Hood
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install - Smart Actuator