CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Caterpillar


Electric Starting Motor - Remove and Install

Usage:

CB-66B B66

Removal Procedure

  1. Turn the battery disconnect switch to the OFF position.


    Illustration 1g06012817

  2. Open door assembly (1).


    Illustration 2g06012870

  3. Disconnect cable assembly (2).

    Note: The hardware for cable assembly (2) is one time use only. Discard after removing.

  4. Disconnect ground strap (5).

  5. Disconnect harness assembly (3).

  6. Remove nuts (4) and electric starting motor (6).

Installation Procedure

  1. Install electric starting motor (6) in the reverse order of removal.

    1. Tighten the nut for ground strap (5) to a torque of 18 ± 3 N·m (159 ± 27 lb in).

    2. Tighten the nut for cable assembly (2) to a torque of 15 ± 3 N·m (133 ± 27 lb in).

Caterpillar Information System:

CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Alternator - Remove and Install
2570D, 2670D Wheel Feller Buncher Operator Controls
Sound Testing Procedure for the 795F AC XQ Off-Highway Truck {0116, 1000, 1801, 1806, 7000, 7076, 7261, 7329} Sound Testing Procedure for the 795F AC XQ Off-Highway Truck {0116, 1000, 1801, 1806, 7000, 7076, 7261, 7329}
New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269} New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269}
A New Refrigerant Compressor Group Is Now Used On Certain Large Off-Highway Trucks {1802} A New Refrigerant Compressor Group Is Now Used On Certain Large Off-Highway Trucks {1802}
Improved Hoses Are Now Used on Certain Backhoe Loaders {5057} Improved Hoses Are Now Used on Certain Backhoe Loaders {5057}
994K Large Wheel Loader Field Assembly Manual Tilt Cylinder - Install
Serviceability of Front Axle May Require Frame Change for Certain Multi-Terrain Loaders {3268, 3278} Serviceability of Front Axle May Require Frame Change for Certain Multi-Terrain Loaders {3268, 3278}
A New Handle Assembly is Used on Certain D Series Skid Steer Loaders, Compact Track Loaders, and Multi-Terrain Loaders {7308} A New Handle Assembly is Used on Certain D Series Skid Steer Loaders, Compact Track Loaders, and Multi-Terrain Loaders {7308}
Implement Hoses May Rub and Wear on Swing Casting for Certain Backhoe Loaders {5057} Implement Hoses May Rub and Wear on Swing Casting for Certain Backhoe Loaders {5057}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Battery - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Engine Enclosure (Hood) - Remove and Install
Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380} Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380}
994K Large Wheel Loader Field Assembly Manual Position Sensor (Lift, Tilt) - Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
Load Haul Dump Power Train Output Transfer Gears - Assemble
Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091} Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Gear Motor (Hydraulic Fan) - Remove and Install
New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104} New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Pump Drive - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Engine - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood - Remove and Install - One Piece Hood
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install - Smart Actuator
Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050} Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.