Gear Motor (Hydraulic Fan) - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | - | Loctite 243 | - |
Start By:
- Remove the cooling system package.
- Remove bolts (1) and brace assembly (2).
Show/hide table
Illustration 2 g02882848 - Remove bolts (3) and fan (4).
Show/hide table
Illustration 3 g02883276 - Remove fan motor (5).
Show/hide table
Illustration 4 g02999957 - Remove nut (7) and adapter (6) from fan motor (5).
Show/hide table
Illustration 1 | g02882736 |
- Install fan motor (5) in the reverse order of removal.
- Tighten nut (7) to a torque of
40 ± 5 N·m (30 ± 4 lb ft) . - Apply Tooling (A) to bolts (3).
- Tighten bolts (1) to a torque of
30 ± 7 N·m (266 ± 62 lb in) .
- Tighten nut (7) to a torque of
Caterpillar Information System:
Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091} Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091}
Load Haul Dump Power Train Output Transfer Gears - Assemble
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
994K Large Wheel Loader Field Assembly Manual Position Sensor (Lift, Tilt) - Install
Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380} Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Electric Starting Motor - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Alternator - Remove and Install
2570D, 2670D Wheel Feller Buncher Operator Controls
Sound Testing Procedure for the 795F AC XQ Off-Highway Truck {0116, 1000, 1801, 1806, 7000, 7076, 7261, 7329} Sound Testing Procedure for the 795F AC XQ Off-Highway Truck {0116, 1000, 1801, 1806, 7000, 7076, 7261, 7329}
New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269} New Rear Axle and Brake Control Groups Are Now Used On Certain 424B Backhoe Loaders {3278, 3282, 4269}
A New Refrigerant Compressor Group Is Now Used On Certain Large Off-Highway Trucks {1802} A New Refrigerant Compressor Group Is Now Used On Certain Large Off-Highway Trucks {1802}
Improved Hoses Are Now Used on Certain Backhoe Loaders {5057} Improved Hoses Are Now Used on Certain Backhoe Loaders {5057}
New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104} New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Pump Drive - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Engine - Remove and Install
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood - Remove and Install - One Piece Hood
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood Tilt Actuator - Remove and Install - Smart Actuator
Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050} Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050}
Installing the 486-3284 Air Conditioner Breather Kit {7320} Installing the 486-3284 Air Conditioner Breather Kit {7320}
Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073} Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073}
Command for Underground Sensor (Light Curtain) - Configure
Command for Underground Sensor (Light Curtain) - Adjust
725C2 Articulated Truck Safety Messages
725C2 Articulated Truck Engine Stopping