Hood Tilt Actuator - Remove and Install - Smart Actuator
- Open rear access door (1).
Show/hide table
Illustration 2 g06028195 - Remove bolts (2). Remove panel (3).
Show/hide table
Illustration 3 g06028200 - Remove pin (4).
Show/hide table
Illustration 4 g06028410 - Open side access panel (5).
Show/hide table
Illustration 5 g06028207 - Disconnect harness assembly (6).
Show/hide table
Illustration 6 g06028411 - Remove pin (7). Remove hood tilt actuator (8).
Show/hide table
| |
| Illustration 1 | g06028193 |
- Install hood tilt actuator (8) in the reverse order of removal.
- Cycle machine power OFF and ON.
- Wait two to three seconds after cycling machine power to use the hood toggle switch.
- Cycle the hood fully open and fully closed to test actuator for proper operation.
Caterpillar Information System:
950M, 962M, 950M Z and 962M Z Wheel Loaders Hood - Remove and Install - One Piece Hood
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Engine - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Pump Drive - Remove and Install
New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104} New Non-Skive Hose Connectors Require Different Size Clamps on Certain B, C, and D-series Backhoe Loaders {5057, 5104}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Gear Motor (Hydraulic Fan) - Remove and Install
Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091} Improved Differential Pressure Sensor Mounting Bracket Available on Certain D Series Skid Steer Loaders, Multi-Terrain Loaders, and Compact Track Loaders {108F, 1091}
Load Haul Dump Power Train Output Transfer Gears - Assemble
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Primary Fuel Filter, Water Separator and Base - Remove and Install
994K Large Wheel Loader Field Assembly Manual Position Sensor (Lift, Tilt) - Install
Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380} Procedure to Improve the Water Lines Routing on Certain 797F Off-Highway Trucks {1380}
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Electric Starting Motor - Remove and Install
CB64B, CB66B and CB68B Asphalt Compactors Engine Supplement Alternator - Remove and Install
Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050} Installation of the 504-1553 Mounting Kit on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {1408, 1429, 7050}
Installing the 486-3284 Air Conditioner Breather Kit {7320} Installing the 486-3284 Air Conditioner Breather Kit {7320}
Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073} Installing the 421-0263 High Flow Kit on Certain Skid Steer Loaders and Compact Track Loaders {5073}
Command for Underground Sensor (Light Curtain) - Configure
Command for Underground Sensor (Light Curtain) - Adjust
725C2 Articulated Truck Safety Messages
725C2 Articulated Truck Engine Stopping
725C2 Articulated Truck Parking
725C2 Articulated Truck Specifications
725C2 Articulated Truck Operator Controls
725C2 Articulated Truck Monitoring System
725C2 Articulated Truck Service Brake Control