System Pressure - Release
Show/hide table
 |
|
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Apply the parking brake.
- Shut off the engine.
- Slowly loosen the filler cap to release the hydraulic oil pressure in the hydraulic system.
- Tighten the filler cap.
- The hydraulic oil pressure in the hydraulic system has been released. Hydraulic lines and components can be disconnected and/or removed.
Caterpillar Information System:
AP300F Asphalt Paver Lifting and Tying Down the Machine
2015/06/23 A New Information Display is Now Used For Certain Cat® Products {7490}
816K Landfill Compactor and 815K Soil Compactor Systems Speed Sensor - Test
AP355F Asphalt Paver Roading the Machine
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Drive and Steering Axle (Front) - Remove
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Drive Shaft (Front) - Remove and Install
PL83 and PL87 Pipelayer Systems Pivot Shaft
AP355F Asphalt Paver Shipping the Machine
Bolt Inspection on 450F Backhoe Loader For Leaking Seal Kit On Hydraulic Gear Pump{5073} Bolt Inspection on 450F Backhoe Loader For Leaking Seal Kit On Hydraulic Gear Pump{5073}
AP355F Asphalt Paver Machine Cleanup Procedure
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 1893 - FMI 12
PL83 and PL87 Pipelayers Engine Supplement Catalyst (SCR) - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Remove
R3000H Load Haul Dump Power Train Final Drive and Brake - Assemble
2015/06/04 Procedure to Install Wear Blocks on the Seat Back of Certain Load Haul Dump Machines {7312}
AP255E Asphalt Paver Engine Supplement Gear Pump (Fan Drive) - Install
797F Off-Highway Truck Field Assembly Fuel Tank - Install
AP255E Asphalt Paver Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
C3.8 Engines for Caterpillar Built Machines Fuel System - C3.8 Tier 4 Final EU Stage IV
740 GC, 740 Ejector, 745 Articulated Truck Power Train Transmission Planetary - Disassemble
740 GC, 740 Ejector, 745 Articulated Truck Power Train Output Transfer Gears - Disassemble
AP255E Asphalt Paver Engine Supplement Suction Fan and Gear Motor (Hydraulic Fan) - Remove
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Relief Valve (Steering) - Test and Adjust
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Disassemble