Gear Pump (Fan Drive) - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-8846     | Gasket Sealant     | 1     |
- Apply Tooling (A) to gear pump (7) and gear pump (11) .
Show/hide table
Illustration 1 | g03842163 |
Show/hide table
Illustration 2 | g03842145 |
- Install gear pump (7) and gear pump (11) .
- Install bolts (9), washers (10), and nuts (8) .
- Install the hydraulic fittings to gear pump (7) .
Show/hide table
Illustration 3 | g03842144 |
- Connect hose assemblies (6) and install throttle cable (5) .
- Connect harness assemblies (4) .
Show/hide table
Illustration 4 | g03842143 |
- Connect hose assemblies (3) .
Show/hide table
Illustration 5 | g03842142 |
- Install access cover (2) and bolts (1) .
Show/hide table
Illustration 6 | g03842141 |
End By:
- Install the radiator and hydraulic oil cooler.
- Install the engine enclosure.
Caterpillar Information System:
2015/06/04 Procedure to Install Wear Blocks on the Seat Back of Certain Load Haul Dump Machines {7312}
R3000H Load Haul Dump Power Train Final Drive and Brake - Assemble
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Remove
AP500F Asphalt Paver Machine Systems System Pressure - Release
AP300F Asphalt Paver Lifting and Tying Down the Machine
2015/06/23 A New Information Display is Now Used For Certain Cat® Products {7490}
816K Landfill Compactor and 815K Soil Compactor Systems Speed Sensor - Test
AP355F Asphalt Paver Roading the Machine
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Drive and Steering Axle (Front) - Remove
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Drive Shaft (Front) - Remove and Install
PL83 and PL87 Pipelayer Systems Pivot Shaft
AP355F Asphalt Paver Shipping the Machine
797F Off-Highway Truck Field Assembly Fuel Tank - Install
AP255E Asphalt Paver Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install
C3.8 Engines for Caterpillar Built Machines Fuel System - C3.8 Tier 4 Final EU Stage IV
740 GC, 740 Ejector, 745 Articulated Truck Power Train Transmission Planetary - Disassemble
740 GC, 740 Ejector, 745 Articulated Truck Power Train Output Transfer Gears - Disassemble
AP255E Asphalt Paver Engine Supplement Suction Fan and Gear Motor (Hydraulic Fan) - Remove
CB64B, CB66B and CB68B Asphalt Compactors Machine Systems Relief Valve (Steering) - Test and Adjust
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Disassemble
AP255E Asphalt Paver Engine Supplement Suction Fan and Gear Motor (Hydraulic Fan) - Install
PL83 and PL87 Pipelayers Engine Supplement Diesel Particulate Filter - Remove and Install - Clean Emissions Module
AP355F Asphalt Paver Parking Brake Manual Release
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Assemble