Drive Shaft (Front) - Remove and Install
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1U-7505 | Hydraulic Jack | 1 |
- Install Tooling (A) under guard (2). Remove bolts (1). Repeat for the other side. Use Tooling (A) to lower guard (2) to the ground. The weight of guard (2) is approximately
38 kg (85 lb) .Show/hide table
Illustration 2 g01116832 - Remove bolts (3). Discard bolts (3).
Show/hide table
Illustration 3 g01116843 - Remove bolts (5) and front drive shaft (4). Discard bolts (5).
Show/hide table
| |
| Illustration 1 | g01116830 |
Note: Removal of guard (2) is optional for clearance purposes.
- Install front drive shaft (4) in the reverse order of removal.
- Use new bolts for bolts (3) and bolts (5). Tighten bolts (3) and (5) to a torque of
28 ± 7 N·m (248 ± 62 lb in) .
- Use new bolts for bolts (3) and bolts (5). Tighten bolts (3) and (5) to a torque of
Caterpillar Information System:
PL83 and PL87 Pipelayer Systems Pivot Shaft
AP355F Asphalt Paver Shipping the Machine
Bolt Inspection on 450F Backhoe Loader For Leaking Seal Kit On Hydraulic Gear Pump{5073} Bolt Inspection on 450F Backhoe Loader For Leaking Seal Kit On Hydraulic Gear Pump{5073}
AP355F Asphalt Paver Machine Cleanup Procedure
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train Electronic Control System MID 027 - CID 1893 - FMI 12
PL83 and PL87 Pipelayers Engine Supplement Catalyst (SCR) - Remove and Install
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Electrical Power Supply - Test
AP355F Asphalt Paver Push Roller
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Final Drive Planetary - Remove and Install - Rear
2015/06/02 Expansion Of Reman Hydraulic Pumps {5070, 7754}
3412E Engine for 773E Off-Highway Trucks Sensor Signal (Analog, Active) - Test
740 GC, 740 Ejector, 745 Articulated Truck Power Train Output Transfer Gears - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Drive and Steering Axle (Front) - Remove
AP355F Asphalt Paver Roading the Machine
816K Landfill Compactor and 815K Soil Compactor Systems Speed Sensor - Test
2015/06/23 A New Information Display is Now Used For Certain Cat® Products {7490}
AP300F Asphalt Paver Lifting and Tying Down the Machine
AP500F Asphalt Paver Machine Systems System Pressure - Release
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain Axle Housing and Flange - Remove
R3000H Load Haul Dump Power Train Final Drive and Brake - Assemble
2015/06/04 Procedure to Install Wear Blocks on the Seat Back of Certain Load Haul Dump Machines {7312}
AP255E Asphalt Paver Engine Supplement Gear Pump (Fan Drive) - Install
797F Off-Highway Truck Field Assembly Fuel Tank - Install
AP255E Asphalt Paver Engine Supplement Radiator and Hydraulic Oil Cooler - Remove and Install